Woodstock W1694 instruction manual Closure

Page 35

Closure

The following pages contain parts diagrams/lists and a warranty card for your SHOP FOX® Model W1694.

If you need parts or help in assembling your machine, or if you need operational informa- tion, we encourage you to call our Service Department. Our trained service technicians will be glad to help you.

If you have comments dealing specifically with this manual, please write to us using the address in the General Information. The specifications, drawings, and photographs illustrated in this manual represent the Model W1694 as supplied when the manual was prepared. However, due to Woodstock International, Inc.’s policy of con- tinuous improvement, changes may be made at any time with no obligation on the part of Woodstock International, Inc. Whenever possi- ble, though, we send manual updates to all own- ers of a particular tool or machine that have reg- istered their purchase with our warranty card. Should you receive one, add the new informa- tion to this manual and keep it for reference.

We have included some important safety mea- sures that are essential to this machine’s opera- tion. While most safety measures are generally universal, we remind you that each workshop is different and safety rules should be considered as they apply to your specific situation.

As with all power tools, there is danger associated with the Model W1694. Use the tool with respect and caution to lessen the possibility of mechanical damage or opera- tor injury. If normal safety precautions are overlooked or ignored, injury to the opera- tor or others in the area is likely.

We recommend you keep this manual for com- plete information regarding Woodstock International, Inc.’s warranty and return policy. Should a problem arise, we recommend that you keep your proof of purchase with your manual. If you need additional technical information relating to this machine, or if you need general assistance or replacement parts, please contact the Service Department at 1-360-734-3482 or e- mail: tech-support@woodstockint.com.

Additional information sources are necessary to realize the full potential of this machine. Trade journals, woodworking magazines, and your local library are good places to start.

The Model W1694 is specifically designed for jointing operations. DO NOT MODIFY AND/OR

USE THIS MACHINE FOR ANY OTHER PURPOSE. MODIFICATIONS OR IMPROPER USE OF THIS TOOL WILL VOID THE WARRANTY. If you are confused about any aspect of this machine, DO NOT use it until all your questions have been answered.

ALWAYS wear safety glasses or goggles when operating this machine. This machine cre- ates the potential for flying debris, which can cause eye injury. Everyday glasses or reading glasses only have impact resistant lenses, they are not safety glasses. Be cer- tain the safety glasses you wear meet the appropriate standards of the American National Standards Institute (ANSI).

-33-

Image 35
Contents Bench TOP Jointer Page Contents About Your New Jointer Woodstock Service and SupportIntroduction Specifications Warranty and ReturnsStandard Safety Instructions Safety#16 #14 11-12 13-16 #12 17-20 #10 21-30 Know Your Machine Safety Instructions for Your Jointer Never surface plane without push blocks Avoiding Potential InjuriesExtension Cords Electrical Requirements110V Operation GroundingInventory AssemblyUnpacking Dust Collection Initial CleaningShop Preparation To attach the fence support, do these steps Rubber FeetFence Support To attach the rubber feet, do these stepsTo assemble the fence assembly, do these steps Fence AssemblyDust Port To install the 90˚ stop slide, do these steps90˚ Stop Slide Assembling the trash bag support To connect the dust port to a trash bag, do these stepsFence AdjustmentsFence Angle Stops Setting the fence to 90˚To adjust the 45˚ outward angle stop bolt, do these steps To adjust the 45˚ inward angle stop bolt, do these stepsTo check the cutterhead blade height, do these steps Blade HeightDepth Of Cut To adjust the depth of cutBlade guard in use Blade GuardTo test run the Model W1694, do these steps OperationsTest Run Correct and incorrect grain Alignment to cutterhead Operation RequirementsOperation Requirements sub-section Surface PlaningTo perform a surface planing operation, do these steps To perform an edge jointing operation, do these steps Edge JointingTo perform a bevel cutting operation, do these Bevel CuttingSharpening Blades MaintenanceGeneral Table SurfaceTo replace the cutterhead blades, do these steps Replacing BladesTo replace a worn out blade guard spring, do these steps Guard SpringLubrication To replace the drive belts, do these steps Drive BeltsMotor Brushes Troubleshooting Chipping occurs on workpiece Closure W1694 Wiring Diagram Parts Fence Page Base with Outfeed Table Warranty Card BOX BELLINGHAM, WA
Related manuals
Manual 44 pages 48.28 Kb