Bosch Power Tools FNA250-15 manual Accessories, No-Mar Pad, Compressor

BM 2610957377 02-09:BM FNA250 06-09 6/17/09 8:01 AM Page 13

Accessories

No-Mar Pad

The No-Mar Pad on the nose of the work contact element protects the work piece from the work contact element toe nailing teeth when the work piece contact is compressed during actuation. The pad can be removed and replaced.

Disconnect the air supply from the tool ! WARNING and remove nail strips before removing

or replacing no-mar pads. Such precautionary safety measures reduce the risk or unintentional tool operation.

To remove the pad: Pull the no mar tip towards the back of the tool following the bend of the wire nose.

To replace the pad. Push the no mar tip on to the tool inserting the opening of the no mar tip on to the wire nose.

Compressor

A correctly sized compressor is critical for maximum tool performance. Use the following calculation to determine the required compressor size.

FIG. 19

No-Mar Pad

Compressor size (CFM) =	Air Consumption(CFM)
	60

x Shots per minute x Number of tools x 1.2

Air Consumption, one shot per second @ 100 psi: 3.1 CFM

13.