Banner L-GAGE manual LG10, 12-30V dc, Gage LG5 and LG10 Specifications

AREA&
LIGHT GAUGING
PART
LABEL&
ULTRASONIC
SLOT
MEASURING	lUMINESCENCE
SCREENS
&
COLOR
LIGHT
TEMPERATURE
LIGHT-TO-
PICK
RADAR

MEASUREMENT & INSPECTION

L-GAGE	®	LG10, 12-30V dc								PDF
										Download
			Sensing	Laser	Sensing	Beam		Discrete	Analog	Data
Models			Beam/LED*	Class	Distance	Size	Cable**	Output	Output	Sheet
LG10A65PU							2 m		0-10V dc
LG10A65PUQ						At 125 mm:	8-pin Euro Pigtail QD	PNP
LG10A65PI							2 m
						0.6 mm			4-20 mA
LG10A65PIQ						x	8-pin Euro Pigtail QD			59786
				Class 2	75-125 mm	0.8 mm
LG10A65NU			LASER DIFFUSE				2 m		0-10V dc
						Focus
LG10A65NUQ							8-pin Euro Pigtail QD	NPN
						180 mm
LG10A65NI							2 m		4-20 mA
LG10A65NIQ							8-pin Euro Pigtail QD

* Visible Red Laser

**For 9 m cable, add suffix W/30 to the 2 m model number (example, LG10A65PU W/30). A model with a QD requires a mating cable (see page 416).

	L-GAGE®LG5 and LG10 Specifications
Sensing Beam	650 nm visible Red IEC and CDRH Class 2 laser; 0.20 mW max. radiant output power
Supply Voltage and Current	12 to 30V dc (10% max. ripple); 50 mA max @ 24V dc (exclusive of load)
Supply Protection Circuitry	Protected against reverse polarity and transient overvoltages
Delay at Power-up	1.25 second
Output Rating	Discrete (switched) and Alarm outputs: 100 mA max.
	OFF-state leakage current: less than 5 µA
	Output saturation voltage
	PNP outputs: less than 1.2V at 10 mA and less than 1.6V at 100 mA
	NPN outputs: less than 200 mV at 10 mA and less than 600 mV at 100 mA
	Analog Current output: 1 kΩ max @ 24V dc, max load resistance = [(Vcc - 4.5)/0.02]Ω (current
	sourcing)
	Analog Voltage output: 2.5 kΩ min. load impedance (voltage sourcing)
Output Configuration	Discrete (switched) & alarm outputs: Solid-state switch; choose NPN (current sinking) or
				PNP (current sourcing) models
	Analog output: 4 to 20 mA (current sourcing), 0 to 10V dc (voltage sourcing)
Output Protection	Discrete and alarm outputs are protected against continuous overload and short circuit
Output Response Time	Discrete Outputs (ON/OFF)
		Fast:	2.0 milliseconds	Medium:	10 milliseconds Slow: 100 milliseconds
	Analog Output (-3dB)
		Fast:	450 Hz (1 millisecond average/1 millisecond update rate)
		Medium: 45 Hz (10 millisecond average/2 millisecond update rate)
		Slow:	4.5 Hz (100 millisecond average/5 millisecond update rate)
Analog Resolution and	LG5:	Fast: Less than 40 µm @ 50 mm			LG10: Fast: Less than 150 µm @ 100 mm
Repeatability of Discrete		Medium: Less than 12 µm @ 50 mm			Medium: Less than 50 µm @ 100 mm
		Slow: Less than 3 µm @ 50 mm			Slow: Less than 10 µm @ 100 mm
Trip Point
		See chart RRC-3 on page 510			See chart RRC-4 on page 510
Analog Linearity*	LG5:	+/- 60 µm			LG10: +/- 200 µm
*Resolution and linearity		over 45 to 60 mm sensing window			over 75 to 125 mm sensing window
specified @ 24V dc, 22° C, using
		+/- 10 µm			+/- 20 µm
a white ceramic test surface (see
		over 49 to 51 mm sensing window			over 95 to 100 mm sensing window
Application Notes)

More on

next page

254 More information online at bannerengineering.com