Banner L-GAGE manual GAGELT7 Specifications cont’d, Class 1 Infrared Sensing Laser, 251

MEASUREMENT & INSPECTION

L-GAGE®LT7 Specifications (cont’d)

Indicators	4 LEDs:
	Green:	Power ON/OFF
	Red:	Alarm (Error) LED

Orange: Output 1 and Output 2 conducting LEDs

	2-line digital LCD display. See data sheet for more information.
Construction	ABS shock-resistant housing; PMMA window; polycarbonate displays
Weight	Approximately 230 g
Environmental Rating	IEC IP67
Connections	12-pin M16 connector; 100 m max. cable length; use only cables listed on page 418.
Operating Conditions	Temperature: -10° to +50° C in continuous operation
Storage Temperature	-30° to +75° C
Vibration/Shock	EN 60947-5-2
Application Notes	• All specifications are based on the specified surface at constant ambient conditions and following a
	minimum operating time of 15 minutes.
	• For best accuracy, allow a 15-minute warmup before programming or operating
	• Crosstalk avoidance: Light spots must be separated by at least 200 mm.
Certifications
Hookup Diagrams	MI05 (p. 533)

LIGHT ULTRASONIC MEASURING TEMPERATURE RADAR

GAUGINGLIGHT SCREENS

Operating Mode

Laser Class 1

Setup Mode

Laser Class 2

Do not stare into beam

Class 1 (Infrared Sensing Laser)

Lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Reference 60825-1 Amend. 2 © IEC:2001(E), section 8.2.

Class 2 (Visible Alignment Laser)

Lasers that emit visible radiation in the wavelength range from 400 to 700 nm where eye protection is normally afforded by aversion responses, including the blink reflex. This reaction may be expected to provide adequate protection under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Reference 60825-1 Amend. 2 © IEC:2001(E), section 8.2.

More information online at bannerengineering.com 251