Banner L-GAGE manual T30U, 15-24V dc, GAGET30U Specifications

LIGHT GAUGING
LABEL&
ULTRASONIC
SLOT
LIGHT		lUMINESCENCE
MEASURING
	SCREENS
&
COLOR
TEMPERATURE
LIGHT-TO-
PICK
RADAR

MEASUREMENT & INSPECTION

U-GAGE	T30U, 15-24V dc							PDF
®								Download
					Discrete	Analog	Response	Data
Models*		Range	Frequency	Cable**	Output(s)	Output	Time	Sheet
T30UUNA				2 m	NPN
T30UUNAQ		150 mm - 1 m	228 kHz	5-pin Euro QD		0 to 10V dc	48 ms
T30UUPA				2 m	PNP
T30UUPAQ				5-pin Euro QD				57438
T30UUNB				2 m	NPN
T30UUNBQ		300 mm - 2 m†	128 kHz	5-pin Euro QD		0 to 10V dc	96 ms
T30UUPB				2 m	PNP
T30UUPBQ				5-pin Euro QD

*For sensors with Teflon®-protected face and transducer (long-range models only), add suffix -CRFVto the model number (example, T30UUNB-CRFV). ** For 9 m cable, add suffix W/30 to the 2 m model number (example, T30UUNA W/30). A model with a QD requires a mating cable (see page 415).

†Teflon®-encapsulated models have a range of 300 - 1.5 m.

	U-GAGE®T30U Specifications
Sensing Range	“A” suffix models: 150 mm min. near limit; 1 m max. far limit
	“B” suffix models: 300 mm min. near limit; 2 m max. far limit
	“-CRFV” models: 300 mm min. near limit; 1.5 m max. far limit
Effective Beam	See charts EBPC-8,EBPC-9,EBPC-10,EBPC-11 and EBPC-12 on page 514.
Supply Voltage	Current sourcing analog output models: 12 to 24V dc (10% max. ripple); 90 mA (exclusive of load)
	Voltage sourcing analog output models: 15 to 24V dc (10% max. ripple); 90 mA (exclusive of load)
	Dual-discrete output models: 12 to 24V dc (10% max. ripple); 90 mA (exclusive of load)
Ultrasonic Frequency	Short Range: 228 kHz
	Long Range: 128 kHz
Supply Protection Circuitry	Protected against reverse polarity and transient voltages.
Output Protection	Protected against continuous overload and short-circuit; transient over-voltage; no false pulse on power-up.
Output Configuration	Discrete (switched) output: Solid-state switch conducts when target is sensed within sensing window;
	choose NPN (current sinking) or PNP (current sourcing) models.
	Analog output: Choose 0 to 10V dc sourcing or 4 to 20 mA sourcing output models;
	output slope may be selected using TEACH sequence.
Output Ratings	Discrete (switched) output: 100 mA max., total–both outputs
	OFF-state leakage current: less than 10 µA
	ON-state saturation voltage: less than 1V at 10 mA and less than 1.5V at 100 mA
	Analog Output:
	Voltage sourcing: 0 to 10V dc (at 1 kΩ min. resistance)
	Current sourcing: 4 to 20 mA, 1 Ω to Rmax.
	Rmax = Vsupply - 7V
		20 mA
Output Response Time	Discrete output: “A” suffix models: 48 milliseconds
	“B” suffix models: 96 milliseconds
	Analog output: “A” suffix models: 48 milliseconds average, 16-millisecond update
	“B” suffix models: 96 milliseconds average, 32-millisecond update
Teflon® is a registered trademark of Dupont™.			More on
			next page

274 More information online at bannerengineering.com