Banner L-GAGE manual GAGEQ50 Discrete Output Specifications, 259

MEASUREMENT & INSPECTION

L-GAGE®Q50 Discrete Output Specifications

Sensing Beam	Wavelength: Q50..V: 685 nm (typical)		Q50..: 880 nm (typical)
	Beam Size: Q50..V: 20 mm dia. (max.)		Q50..: 20 mm dia. (max.)
Sensing Range	Q50AV: 50 to 150 mm		Q50A: 50 to 200 mm
	Q50BV: 100 to 300 mm		Q50B: 100 to 400 mm
Supply Voltage and Current	12 to 30V dc (10% max. ripple); 70 mA max. (exclusive of load)
Supply Protection Circuitry	Protected against reverse polarity and transient overvoltages
Output Configuration	Solid-state Complementary; Choose NPN (current sinking) or PNP (current sourcing) models.
Delay at Power-up	2 seconds
Output Rating	Complementary Discrete Output 150 mA max., per output
	OFF-state leakage current: Less than 10 µA
	ON-state saturation voltage: Less than 1V @ 10 mA and less than 1.5V @ 100 mA
Output Protection	Protected against false pulse on power-up and continuous overload or short circuit of outputs.
Output Response Time	2-second delay on power-up:
	Fast: 4 milliseconds ON/OFF Slow: 48 milliseconds ON/OFF
Output Hysteresis	See charts HC-5 and HC-6 on page 512.
Sensing Repeatability	Slow Response (Q50..): 0.5% of sensing distance
	Fast Response (Q50..Y): 1.0% of sensing distance
Color Sensitivity (typical)	See charts CSC-2 and CSC-3 on page 511.
Temperature Effect	Q50B.. models: From 0° to 50° C: 0.25 mm/° C			From -10° to 55° C: 0.35 mm/° C
	Q50A.. models: From 0° to 50° C: 0.08 mm/° C			From -10° to 55° C: 0.11 mm/° C
Remote TEACH Input	15 kΩ
Impedance
Remote TEACH Input	To Teach: Connect gray wire to +5 to 30V dc
	To Disable: Connect gray wire to 0 to +2V dc (or open connection)
Adjustments	Sensing Window Limits: TEACH-mode programming of near and far window limits may be set using
	the Teach push button or remotely using the gray Teach wire.
Indicators	Range LED	Green — Target is within sensing range
	Indicator	Red — Target is outside sensing range
	(Green/Red)	Flashing Green — Outputs are overloaded
		OFF — Sensor Power OFF
	Teach/Output	Yellow (window limits) — Target is within taught window limits
	LED Indicator	Yellow (fixed field) — Target is closer than cutoff limit
	(Yellow/Red)	OFF — Target is outside taught window limits
		Red — Sensor is in TEACH mode
Ambient Light Immunity	< 10,000 LUX
Construction	Housing: Molded ABS/Polycarbonate			Window Lens: Lens: Acrylic
	Hardware: M3 hardware is included
Environmental Rating	IEC IP67; NEMA 6P
Connections	2 m or 9 m 5-conductor PVC-covered attached cable, or 5-pin Euro-style quick-disconnect.
	See page 416.
Operating Conditions	Temperature: -10° to +55° C			Relative humidity: 90% at +50° C (non-condensing)
Vibration and	All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double
Mechanical Shock	amplitude 0.06”, maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G,
	11 milliseconds duration, half sine wave.
Application Notes	Allow 15-minute warm-up for maximum performance
Certifications
Hookup Diagrams	MI08 (p. 533)

LIGHT ULTRASONIC MEASURING TEMPERATURE RADAR

GAUGINGLIGHT SCREENS

More information online at bannerengineering.com 259