Banner L-GAGE manual GAGEMINI-ARRAYSensor Specifications, 301, Minimum Object Sensitivity

			MEASUREMENT & INSPECTION
A-GAGE®MINI-ARRAY®Sensor Specifications
Emitter/Receiver Range	9.5 mm beam spacing		19.1 mm beam spacing
Max range is specified at the point	Array Length 143 to 1057 mm: 0.6 to 6.1 m		Array Length 133 to 1057 mm: 0.9 to 17 m
where 3x excess gain remains.	Array Length 1210 to 1819 mm: 0.6 to 4.6 m		Array Length 1200 to 1810 mm: 0.9 to 14 m
Minimum Object Sensitivity	9.5 mm Beam Spacing		19.1 mm Beam Spacing
	Straight, Edge Modes: 19.1 mm		Straight, Edge Modes: 38.1 mm
	Interlaced Mode: 12.7 mm*		Interlaced Mode: 25.4 mm*
	With DeviceNet Controller:		With DeviceNet Controller:
	Straight, Edge Modes: 19.1 mm		Straight, Edge Modes: 38.1 mm
	Skip Mode: Multiply the above by the		Skip Mode: Multiply the above by the
	number of skipped beams, plus 1		number of skipped beams, plus 1
	Interlaced Mode: 12.7 mm*		Interlaced Mode: 25.4 mm*
	*Assumes sensing is in the middle 1/3 of sensing range.
Sensor Scan Time	55 microseconds per beam, plus 1 millisecond post process time per scan.
	DeviceNet: Post process time will vary, based on the number of channels interrogated during each scan.
Power Requirements	9.5 mm beam spacing		19.1 mm beam spacing
†Maximum current is for a 6' sensor.	12V dc ±2%, supplied by controller		12V dc ±2%, supplied by controller
	Emitter: 0.10 A @ 12V dc		Emitter: 0.10 A @ 12V dc
	Receiver: 0.75 A @ 12V dc†		Receiver: 0.50 A @ 12V dc†
Connections	Sensors connect to controller using 5-conductor Mini-style quick-disconnect cables (one each for
	emitter and receiver), ordered separately. Use only Banner cables, which incorporate a “twisted pair”
	for noise immunity. Cables measure 8.1 mm dia. and are shielded and PVC-jacketed. Conductors are
	20 gauge. Emitter and receiver cables may not exceed 75 m long, each. See page 421.
Status Indicators	Emitter: Red LED lights to indicate proper emitter operation
	Receiver: Green indicates sensors aligned (> 3x excess gain)
	Yellow indicates marginal alignment of one or more beams (1x -3x excess gain)
	Red indicates sensors misaligned or one or more beam(s) blocked
Construction	Aluminum, with black anodized finish; acrylic lens cover
Environmental Rating	NEMA 4, 13; IP65
Operating Conditions	Temperature: -20° to +70° C	Relative humidity: 95% at 50° C (non-condensing)

LIGHT ULTRASONIC MEASURING LIGHT TEMPERATURE RADAR GAUGINGSCREENS

More information online at bannerengineering.com 301