If all fuel flows configured (Configuration name unavailable):
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight B. DEVICES and press MENU. The Bus Devices list will appear.
3.Select the Port FFlow and press MENU.
4.Highlight UNSET ENGINE and press MENU. The following message will appear: Hit Menu to Unset Dev Name.
5.Press MENU and you will be taken back to the Bus Devices menu, where fuel flow (formerly Port FFlow) now will be displayed as UnCfg FFlow.
Remember: If the fuel flow you just unconfigured is not shown on the Bus Devices the list, you will have to refresh the list. Let the Bus Devices list time out then access it again.
6.Highlight STBD FFLOW and press MENU. Select CHANGE ENGINE and press MENU, which will open the Select Engine menu with up to three options: Port, Cen, Stbd.
7.Highlight PORT and press MENU.
8.You will be taken back to the Bus Devices list, where the fuel flow you selected (formerly Stbd FFlow) will now be shown as Port FFlow. If the newly configured fuel flow is not shown, refresh the Bus Devices list.
9.Now, select UNCFG FFLOW and press MENU. The following message will appear: Hit Menu to Cfg Flow Sns.
10.Press MENU, which will open the Select Engine menu. Highlight Starboard and press MENU. You will be directed to the Bus Devices list where the fuel flow now will be displayed as Stbd FFlow. If the newly configured fuel flow is not shown, refresh the Bus Devices list.
If configuration name available:
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight B. DEVICES and press MENU. After a few moments, the Bus Devices list will appear.
3.Highlight PORT FFLOW and press MENU. Select CHANGE ENGINE and press MENU, which will open the Select Engine menu with up to three options: Port, Cen, Stbd.
4.Highlight STARBOARD and press MENU.
12