Lowrance electronic EP-60R installation instructions Alarm Status Tab, Restore Defaults

Page 44

Alarm Status Tab

The Alarm Status tab is the second tab at the top of the NMEA 2000 Alarms page. When an alarm has been set for a device, the alarm and its current status will be shown on the Alarm Status window.

To view Alarm Status:

1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.

2.Select NMEA 2000 ALARMS and press ENTER.

3.Highlight the Alarm Status tab.

4.Press EXIT repeatedly to return to the main display.

Restore Defaults

The Restore Defaults command allows you to reset EP-60R Fuel Flow settings to factory defaults.

NOTE:

After using the Restore Defaults command, you will have to re- enter your engine-tank configuration. It, however, will not affect the configuration or calibration of other devices on the network.

To use the Restore Defaults command:

1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER. A menu will appear with five options: Bus Setup, Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization.

2.Highlight BUS SETUP and press ENTER, which will open the Bus Configuration menu. A list of network devices will be at the top of the page.

3.Select the desired fuel flow and press ENTER. The Device Configuration menu will appear.

4.Highlight ADVANCED OPTIONS and press ENTER.

5.Select RESTORE DEFAULTS and press ENTER. The following message will appear: Are you sure you wish to change this device's configuration?

6.Highlight YES and press ENTER. Press EXIT repeatedly to return to the main display.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents EP-60R Fuel Flow Tools and Supplies Installation Flow direction Engine From Tank Connecting to a Nmea 2000 Network Network Backbone and Network NodesAdding a Network Node Additional Network Information Page LMF-200 EP-60R Configuration & Calibration Boat SetupFuel Remaining Source FRem Src EP-60R Fuel Flow ConfigurationBoat Setup Reset Change Engine Active only with multiple-engine setting Page Fuel Flow Accuracy ResetEP-60R Fuel Flow Calibration To customize Fuel Manager Partial Fill Part Fill Reset CalibrationRefill Tank Refill T Reset Trip Fuel Used Rst trip f Economy Speed Source Eco spdReset Seasonal Fuel Rst Seas Fuel WarningScreen Rotation Engine Warnings AlarmsDisplaying data from fuel flow Customizing Pages To use reset command LMF-400 EP-60R Configuration & Calibration Fuel Remaining Source To unconfigure a fuel flow Change Engine active only with multiple-engine setting To add the Fuel Manager page to the display Enter Refill Tank Partial FillEconomy Speed Source Reset Trip FuelReset Seasonal Fuel Warning Displaying data from a fuel flow To customize Quad Digital Reset Values Display Unit EP-60R Configuration & Calibration Bus SetupEngine & Tank Configuration Nmea 2000 Devices List Device Configuration Menu Device Information and Device DataDevice Name Unconfiguring an EP-60R Fuel Flow LocationAdding Fuel to Tank Fuel Management MenuTank Operations If you filled up the tank Engine Operations To Reset Trip Nmea 2000 Alarms Alarm Status Tab Restore DefaultsPage Page Lowrance Electronics Full ONE-YEAR Warranty How to Obtain Service… For Lowrance 800-324-1356. For Eagle
Top Page Image Contents