Lowrance electronic EP-60R installation instructions Refill Tank, Partial Fill

2.Highlight BUS DEVICES and press ENTER. Highlight the fuel flow you want to reset and press ENTER.

3.Select RESET CAL from the fuel flow menu and press ENTER. The following message will appear: Press Enter to reset the Calibration.

4.Press ENTER to set calibration back to default settings. To recalibrate the fuel flow, follow the fuel flow calibration steps in this section.

Refill Tank

Since the EP-60R is not connected to the tank, its fuel information is not automatically updated when the tank is filled up. You must use the Refill Tank command to ensure the fuel information in the EP-60R stays consistent with the amount of fuel actually in the tank.

To refill tank:

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER.

2.Highlight FUEL SETUP and press ENTER.

3.Select REFILL TANK and press ENTER. The select Tank menu will appear with up to three options. Select the tank you refilled and press ENTER. (If you have one tank, you will be taken directly to the recalibration window mentioned in step 4.)

4.A recalibration window will appear with two options: Yes and No. Select NO and press ENTER. The following message will appear: Press Enter after refilling the fuel tank.

5.Press ENTER. You will be directed back to the main display.

Partial Fill

Since the EP-60R is not connected to the tank, its fuel information is not automatically updated when fuel is added to the tank. When you add fuel to a tank without completely filling it up, you must use the Partial Fill command. This will ensure the fuel information in the EP- 60R stays consistent with the amount of fuel actually in the tank.

To use Partial Fill:

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER. Highlight FUEL SETUP and press ENTER.

2.Select PARTIAL FILL and press ENTER. The Select Tank menu will appear with up to three options. (If you have one tank, you will be taken directly to the Adding Fuel window.)

3.Select the desired tank and press ENTER. The Adding Fuel window will appear.

27