Lowrance electronic EP-60R installation instructions To customize Quad Digital

Page 31

To customize Single Digital page:

1.After the Single Digital page has been added to the page screen rotation, use the ENTER and EXIT keys to display it on the main screen.

2.Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The data menu will appear.

3.Highlight Fuel Flow, Fuel Range, Fuel Used, Trip Fuel Used or Seasonal Fuel and press ENTER. A menu will appear, allowing you to display data from a single engine or from all engines. (If you select FUEL RANGE or if your unit is configured for one engine, you will be directed back to the main display.)

4.Select the desired engine or, to display data from all engines, highlight Vessel and press ENTER. You will be taken back to the main display, where the data you selected will be shown.

To customize Dual Digital page:

1.After the Dual Digital page has been added to the page screen rotation, use the ENTER and EXIT keys to display it on the main screen.

2.Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The Position menu will appear with two options: Top Data and Bottom Data.

3.Highlight the desired data position and press ENTER.

4.Select FUEL FLOW, FUEL RANGE, FUEL USED, TRIP FUEL USED or SEASONAL FUEL

and press ENTER. A menu will appear, allowing you to display data from a single engine or from all engines. (If you select FUEL RANGE (RNG) or if your unit is configured for one engine, you will be taken back to the Position menu.)

5.Select the desired engine or, to display data from all engines, highlight Vessel and press ENTER. You will be taken back to the Position menu. To display data in the other data box, repeat Steps 3-5.

6.Press EXIT twice to return to the main display.

To customize Quad Digital page:

1.After the Quad Digital page has been added to the page screen rotation, use the ENTER and EXIT keys to display it on the main screen.

2.Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The Position menu will appear with four options: Data Box 1, Data Box 2, Data Box 3 and Data Box 4.

3.Highlight the desired data position and press ENTER.

4.Select FUEL FLOW, FUEL RANGE, FUEL USED, TRIP FUEL USED or SEASONAL FUEL

USED and press ENTER. A menu will appear, allowing you to display

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents EP-60R Fuel Flow Tools and Supplies Installation Flow direction Engine From Tank Network Backbone and Network Nodes Connecting to a Nmea 2000 NetworkAdding a Network Node Additional Network Information Page Boat Setup LMF-200 EP-60R Configuration & CalibrationBoat Setup Reset EP-60R Fuel Flow ConfigurationFuel Remaining Source FRem Src Change Engine Active only with multiple-engine setting Page EP-60R Fuel Flow Calibration ResetFuel Flow Accuracy To customize Fuel Manager Refill Tank Refill T Reset CalibrationPartial Fill Part Fill Economy Speed Source Eco spd Reset Trip Fuel Used Rst trip fFuel Warning Reset Seasonal Fuel Rst SeasDisplaying data from fuel flow Engine Warnings AlarmsScreen Rotation Customizing Pages To use reset command LMF-400 EP-60R Configuration & Calibration Fuel Remaining Source To unconfigure a fuel flow Change Engine active only with multiple-engine setting To add the Fuel Manager page to the display Enter Partial Fill Refill TankReset Seasonal Reset Trip FuelEconomy Speed Source Fuel Warning Displaying data from a fuel flow To customize Quad Digital Reset Values Bus Setup Display Unit EP-60R Configuration & CalibrationEngine & Tank Configuration Nmea 2000 Devices List Device Information and Device Data Device Configuration MenuDevice Name Location Unconfiguring an EP-60R Fuel FlowTank Operations Fuel Management MenuAdding Fuel to Tank If you filled up the tank Engine Operations To Reset Trip Nmea 2000 Alarms Restore Defaults Alarm Status TabPage Page Lowrance Electronics Full ONE-YEAR Warranty For Lowrance 800-324-1356. For Eagle How to Obtain Service…
Top Page Image Contents