Economy Speed Source, Reset Trip Fuel | Lowrance electronic EP-60R

NOTE:

When using the Partial Fill command, you will only be able to input into the gauge, an amount of fuel less or equal to the fuel used figure. The unit will not allow you to enter a fuel amount greater than the fuel used figure.

4.Use the UP and DOWN keys to input the amount of fuel added to the tank and press ENTER. You will be taken back to the main display.

Economy Speed Source

The Economy Speed menu allows you to choose what speed source (Water Speed, Pitot Speed or Ground Speed) the LMF-400 will use to calculate Fuel Economy. Ground Speed (GPS) is the default speed source.

To change Economy Speed source:

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER. Select FUEL SETUP and press ENTER.

2.Highlight ECO SPEED SRC and press ENTER to open the Economy Speed menu. The menu has three options: Water Speed (Paddlewheel), Pitot Speed and Ground Speed (GPS).

3.Select the desired speed source and press ENTER. You will be taken back to the main display.

Reset Trip Fuel

The LMF-400 keeps a running total of fuel used for a trip. By using the Reset Trip command, you can reset to zero the running total of fuel used on a trip.

To reset trip fuel:

1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER. Select FUEL SETUP and press ENTER.

2.Highlight RST TRIP FUEL and press ENTER. The Select Engine menu will appear with up to four options. (If you have one tank, the Press Enter to reset Trip Fuel (Step 3) message will appear.)

3.Select the desired engine or All Engines and press ENTER. The following message will appear: Press Enter to reset Trip Fuel.

4.Press ENTER, which will reset the trip fuel to zero and take you back to the main display.

Reset Seasonal

The LMF-400 keeps a running total of fuel used for a season. By using the Reset Seasonal command, you can reset to zero the running total of fuel used for a season.