data from a single engine or from all engines on the vessel. (If you select FUEL RANGE or if your unit is configured for one engine, you will be taken back to the Position menu.)
5.Select the desired engine or, to display data from all engines, highlight Vessel and press ENTER. You will be taken back to the Position menu. To display data in another data box, repeat Steps
6.Press EXIT twice to return to the main display.
To customize Fuel Manager page:
1.After the Fuel Manager page has been added to the page screen rotation, use the ENTER and EXIT keys to display it on the main screen.
2.Press MENU, use the UP and DOWN keys to select CUSTOMIZE and press ENTER. The Position menu will appear with three options: Top Data, Center Data and Bottom Data.
3.Highlight the desired data position and press ENTER.
4.Select FUEL FLOW, FUEL RANGE, FUEL USED, TRIP FUEL USED or SEASONAL FUEL
USED and press ENTER. A menu will appear, allowing you to display data from a single engine or from all engines on the vessel. (If you select
FUEL RANGE or if your unit is configured for one engine, you will be taken back to the Position menu.)
5.Select the desired engine or, to display data from all engines, highlight Vessel and press ENTER. You will be taken back to the Position menu. To display data in another data box, repeat Steps
6.Press EXIT twice to return to the main display.
Reset Values
By accessing Reset Values from the Fuel Flow menu, you will be able to reset configuration and calibration settings for a particular fuel flow.
NOTE:
After using the Reset Values command, you will have to
To reset values:
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press ENTER.
2.Highlight BUS DEVICES and press ENTER. Select the fuel flow you want to reset and press ENTER.
3.Choose RESET VALUES from the fuel flow menu and press ENTER. The following message will appear: Press Enter to Reset Device Values.
4.Press ENTER and you will be taken back to the Bus Devices list.
32