Lowrance electronic EP-60R instruction

LMF-400: EP-60R

Configuration & Calibration

This section covers how to use the EP-60R Fuel Flow with a LMF-400 Multi-function gauge.

LMF-400 Multi-function Digital gauge.

Boat Setup

If this is the first time you have turned on your LMF-400, you will have to complete Boat Setup before you will be able to configure or calibrate your fuel flow. If you have already completed Boat Setup, skip ahead to the segment covering EP-60R Fuel Flow Configuration.

To execute Boat Setup:

1.With Boat Setup highlighted on the screen, press ENTER. A menu will appear, allowing you to choose the number of engines and fuel tanks on your vessel. The Boat Setup menu options are: 1 Eng/1 Tank,

1Eng/2 Tank, 2 Eng/1 Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3 Eng/3 Tanks.

2.Use the UP and DOWN keys to select the engine-tank configuration that applies to your vessel and press ENTER. After setting the engine/tank configuration, the Tank Size menu will appear with up to three options. (If you selected one tank during Boat Setup, you will be taken directly to the Setting Tank Size Window in Step 4.)

3.Select the desired tank and press ENTER, which will open the Setting Tank Size window.

4.Use the UP and DOWN keys to input the size of the tank and press ENTER. Repeat steps 3 and 4 for each of the remaining tanks.

5.After all tanks on your vessel have been set up, press EXIT repeatedly to return to the main display.