Regent Sheffield CMS240W, CMS240 MS240W How to select your desired feature, Night Time on then

Step 2: Turn on the power to fixture. Allow fixture to warm up approximately 90 seconds before testing. (Lights may or may not come on during warm-up period.This is normal.)

Step 3: Aim sensor head in desired position. NOTE: Maintain

air spacing between lamps and sensor head, at least	MODE
1”. Make sure sensor head is positioned with

TEST

SENSITIVITY

control switches facing towards the ground.

Step 4: Walk across the detection zone at the farthest distance

you wish your detector to detect motion.

Step 5: Adjust sensitivity until you get desired results. For

more range, aim sensor head slightly upwards . For

less range, aim sensor head slightly downward. Lights

will turn off 4 seconds after all motion stops.

Step 6: Move slide switch to 4 MIN or 12 MIN (AUTO mode),

or to one of the three NIGHT TIME ON settings. At dusk,

lights will operate in the AUTO or NIGHT TIME ON settings.

4 MIN

12 MIN

2 HR

4HR

6HR

H

M

L

F

How to select your desired feature

Mode of	Set slide switch	How to set
operation:	on sensor to:	power switch:
Test Setting
Lights should turn on with	TEST	Keep the power to
motion both day and
night. Lights should turn		the fixture on.
OFF after 4 seconds.
Motion Activated
(auto setting)	AUTO 4 MIN	Keep the power to
Lights should turn on with
motion only at night and	or	the fixture on.
should turn off after 4 or	AUTO 12 MIN
12 minutes of no motion.
2 Hour	NIGHT TIME ON
NIGHT TIME ON then
Motion Activated	2 HR
Lights should turn on	(2 Hours)
automatically at night	Note: Once the light has come onin	Keep the power to the
100% brightness for 2
	the selected NIGHT TIMEONmode,	fixture on.
hours, then reset to	you cannot change the mode setting
regular auto motion	until the next dawn. The light will
	operate in the first NIGHT TIMEON
setting for the remainder	mode selected (2 hour, 4 hour, or
of the evening.	6 hour), even if changed.
4 Hour	NIGHT TIME ON
NIGHT TIME ON then
Motion Activated	4 HR
Lights should turn on	(4 Hours)
automatically at night	Note: Once the light has come onin
100% brightness for 4
	the selected NIGHT TIMEONmode,	Keep the power to the
hours, then reset to	you cannot change the mode setting
regular auto motion	until the next dawn. The light will	fixture on.
	operate in the first NIGHT TIMEON
setting for the remainder	mode selected (2 hour, 4 hour or
of the evening.	6 hour), even if changed.
		(continued)

4