Line Scan
Line Scan centers the rotor horizontally and can be used to align the plumb beam to a desired horizontal position. Press and release the MENU button at the Standard Display and select Line Scan. Pressing and releasing button 4 activates the Line Scan mode while the rotor checks the limits of the X- axis and stops at the center position.
Pressing button 3 (ESC) stops the movement and changes the unit into manual mode. Corrections up and down can be done using button 5/8; for left/right corrections use button 6/7.
Press and release the manual button to change the unit back to full automatic mode.
Beam Plunge
Beam Plunge centers the rotor vertically and can be used to align the plumb beam to a desired vertical position, e.g., when doing Interior layout.
Press and release the MENU button at the Standard Display and select Beam Plunge. Pressing and releasing button 4 activates the Beam Plunge mode while the rotor checks the limits of the
Y- axis and stops at the center position.
Pressing button 3 (ESC) stops the movement and changes the unit into manual mode. Corrections up and down can be done using button 5/8; for left/right corrections use button 6/7.
Press and release the manual button to change the unit back to full automatic mode.
Setting Menu
Press and release the MENU button at the Standard Display and select Settings.
Press and release button 4 to open the Setting Menu; select the desired function then press button 4 to open the selected submenu function OR start the selected function.
The Setting Menu offers the following functions:
|
|
|
|
|
|
|
|
|
|
|
Pairing | Mask Mode | Grade Entry | Grade Display | Sensitivity | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Information | Set Password | Password On/Off |
Pairing
When in Settings, press and release button 4 to open the Pairing menu. The display shows the currently paired units (up to two receivers and two remote controls). If already 2 remote controls have been paired, one of them has to be deleted using button 1 (CLR).Turn on the RC603 and select the Pairing menu and press button 4.
The UL633 pairs now automatically with the new remote control.
14