2-2 Installation
∙If planning to connect the laser engraving system to a computer through the parallel port, choose a location where the computer will be placed within 6 feet of the machine since this is the maximum recommended parallel cable length. Included with your system is a high quality, IEEE1284 compliant,
ONLY. DO NOT SUBSTITUTE IT WITH A LONGER OR LOWER QUALITY CABLE OTHERWISE FILE TRANSMISSION ERRORS MAY OCCUR.
∙If connecting an additional laser system or other printer to the same computer, we recommend the installation of an additional parallel port into the computer. DO NOT use a manual A/B type switch box. This creates electrical noise, which can cause an engraving problem or can damage the laser system and/or the computer’s electronics.
∙It is possible to connect your computer to the laser system via the computer’s USB port. However, to do this, a special USB to Parallel Port adapter cable MUST be purchased. We recommend only “Belkin” brand converter cables. This cable can be purchased through your local computer store or purchased via the Internet through Belkin’s web site, www.belkin.com. Follow the manufacturer’s instructions on how to install the cable.
Electrical Requirements
Please refer to the “INPUT POWER” sticker near the system’s ON/OFF switch and power inlet for your system’s electrical requirements. Make sure that your electrical outlet is capable of providing the proper voltage, frequency and amperage that your laser system needs.
Noisy or unstable electricity as well as voltage spikes can cause interference and possible damage to the electronics of the laser system. Connect the laser system to a dedicated electrical line if this is a problem in your building.
An IT type of electrical supply is acceptable if a standard power source is unavailable. An IT power system is a power distribution system having no direct connection to earth, the exposed conductive parts of the electrical installation being earthed.
L1
L2
L3
N
Impedance
Power system |
|
|
|
| PE | |
earth | Exposed conductive parts |
| ||||
|
| |||||
| Example of IT power system |
| ||||
Never remove the ground lead to the electrical cord and plug the system into a