Hobart Welding Products OM-945 manual Full Tools Needed

8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Robin-Powered Units)

Full

4

5

3

2

1

Tools Needed:

YStop engine and let cool.

1 Oil Drain Valve

2 1/2 ID x 7 in Hose

3 Oil Filter

Change engine oil and filter ac- cording to engine owner’s manual.

YClose valve and valve cap before adding oil and running engine.

Fill crankcase with new oil to full mark on dipstick (see Section 8-2).

4Fuel Filter

5Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

YStop engine, tighten connections as neces- sary, and wipe up fuel.

802 353-G / S-0842

OM-945 Page 27