Hobart Welding Products OM-945 manual 802 339-G / S-0842

9-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Kohler-Powered Units)

Full

4

5

3

2

1

Tools Needed:

YStop engine and let cool.

1 Oil Drain Valve

2 1/2 ID x 7 in Hose

3 Oil Filter

Change engine oil and filter accord- ing to engine owner’s manual.

YClose valve and valve cap before adding oil and running engine.

Fill crankcase with new oil to full mark on dipstick (see Section 9-2).

4Fuel Filter

5Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

YStop engine, tighten connec- tions as necessary, and wipe up fuel.

802 339-G / S-0842

OM-945 Page 33