Single-Stage Outdoor Split R22 Systems
The GT-S does not need to be located outside. It can be placed in garages, carports, basements, crawl spaces, etc.This may be important to some homeowners who may be very concerned about outdoor aesthetics.They also can utilize ground water if placed in an appropriate indoor location. Noise is not a problem as the GT-S is extremely quiet (the box is sealed and insulated).The GT-S also has excellent heating and latent cooling capacities compared with competitive high efficiency geothermal units. In many cases a GT-S produces the heating
output of one size larger competitor unit. And the GT-S is likely to be the highest EER per dollar cost unit available in the geothermal industry today.
The goal for the GT-S Series is based upon application flexibility, efficiency, reliability and a solid state microprocessor compressor control, producing a reliable, simple product both easy to service and install. Its efficiency and application flexibility make it the “Paradigm” of geothermal heat pumps.
Typical GT-S / Air Handler Installation
Power
Disconnects
Condensing
UnitInsulated line
set with UV
Paint
Air Pad
Low Voltage Wiring
PVC Condensate
with vented trap
Typical GT-S / Add-on Coil Installation
TXV “IN” toward outdoor
condensing unit
Power
Disconnects
Condensing
UnitInsulated line
set with
UV Paint
Air Pad
Low Voltage Wiring | PVC Condensate |
| with vented trap |
Air Handler
TXV “IN” toward
outdoor
condensing Unit
Return Plenum
Add-On
“A” Coil
Air
Temperature
Limit Switch
Fossil Furnace | Return Plenum |
|
Carrier Indoor & Outdoor Split Geothermal Heat Pumps - Rev.: 08/10/05
