Carrier
Accessories & Options
Hot Water Generator (internal) -
An optional heat reclaiming desuperheater coil of vented
Hot Water Generator (field installed) -
Cupro-Nickel Heat Exchanger
An optional corrosion resistant CuNi coaxial heat exchanger shall be factory installed in lieu of standard copper construction.
Thermostat (field installed)
A multistage
thermostat shall be provided. The thermostat shall offer 2 heating and 1 cooling stages
Flow Controller (field installed)
A
fill and connection requirements for
a galvanized steel or plastic case and fully insulated with urethane foam to prevent condensation. The Flow Controller shall have a
Hose Kits (field installed) - GT-PX & GT-GS only
A rubber hose kit shall provide connections between the unit and Flow Controller. Rubber 1” hose allows flexible connection and absorbs vibration transmission between unit and Flow Controller. Brass elbows with MPT fittings for unit connection, barbed fittings for hose connection and FPT fittings for Pressure/Temperature ports shall be included to allow service and troubleshooting of the unit. Hose clamps shall be used to connect the hose to the brass elbows and Flow Controller.
Cooling TXV Kit (field installed) - R-22 GT-GS & GT-S units only
A cooling thermostatic expansion valve kit shall be provided to be field installed on the
Warranty Information
The Carrier residential warranty reflects the reliability built in to every unit and includes five years on all parts, and ten years on the compressor and refrigerant circuit parts with a service labor allowance during the first 30 days. An optional extended warranty is available for residential units, which adds a labor allowance and trip charge. See extended warranty
certificate (CA186) for details.
52
Carrier Indoor & Outdoor Split Geothermal Heat Pumps - Rev.: 08/10/05