Carrier KC_183P manual Assembly of the side shutters curtains to the cabinet, Unit Damage Hazard

Page 7

NOTE: For 14K to 23K models, the bottom channel has been factory-installed, and their shapes may differ from the others, but their functions are similar.

Step 4 —Assembly of the side shutters (curtains) to the cabinet.

A.Slide the shutters into the top and bottom channels as shown in Fig. 9. The shutters are identified (on each frame) as ”left” & ”right”. Attach the shutters to the cabinet using (4) 1/4” screws on each side.

Double

Adhering seal

1/4" Screw

Channel

For 10K to 12K models

For 14K to 23K models,

 

( Factory-Installed)

 

A06537

Fig. 8 ---Channel Assembly

 

Shutter Frame

 

1/4" screw

 

Right Shutter

A06538

Fig. 9 ---Shutter Assembly

Step 5 —Installation of Mounting Brackets and First Sealing Strip

NOTE: Windows come in a variety of different styles. Therefore, it may be necessary to modify or improve your particular installation.

A.Attach the bracket assembly to 90 angle support brackets (Fig.

10)using (2) 1 1/2” bolts, two bolts per bracket. Secure with the (2) 1/4” lock washers and (2) 1/4”nuts. DO NOT immediately tighten these bolts as it may be necessary to adjust the depth of the bracket assembly, depending on the depth of your window sill. See (Fig. 12).Install the two leveling screws into the 90 support brackets. Test the bracket assembly in the window before cabinet installation. If the leveling screws are distanced too far away from the wall to provide stability, it may be necessary for you to fill this area with a solid piece of wood. See (Fig. 13).

B.Measure the inside window sill width and find the center as shown in (Fig. 11). Align the V-slot in each bracket on these marks and mount the brackets to the sill using 3/4” screws provided. Brackets should be perpendicular to the inside window sill. See (Fig. 11).

(TOP VIEW)

V-slot

Bracket Assembly

90 Angle

Bracket BoltsSupport Brackets

Leveling Screw

A06539

Fig. 10 ---Bracket Assembly

V-slot

Center

 

9.6"

9.6"

 

 

10.3"

 

 

10.3"

 

12.6"

 

 

12.6"

 

 

 

 

 

Measurement for Model 10K =9.6"

 

Measurement for Model 12K = 10.3"

Window sill

Measurement for Model 14K to 23K = 12.6"

 

A06540

Fig. 11 ---Bracket Mounting

C.For proper condensation run-off it will be necessary to adjust the angle/pitch of the window brackets. This is accomplished by adjusting the distance of the leveling screw on the outer wall. The maximum angle/pitch should not exceed more than 3/16”. See (Fig.12).

D.Cut the seal strip to fit the underside of the bottom window sash. Remove the peel-off backing on the seal and attach it to this sash. See (Fig. 14).

!CAUTION

UNIT DAMAGE HAZARD

Failure to follow this caution may result in unit damage.

Use a solid piece of wood to provide stability. This will be required when sills are extra deep (see Fig. 13).

(2) 3/4" screws per bracket

3/16" Maximum

Bracket Assembly

Leveling Screw

Outer Wall Construction

A06541

Fig. 12 ---Depth/Angle Illustration

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Date Installed Remote Control UnitTable of Contents Introduction Safety ConsiderationsAirc onditioner Electrical Shock Hazard Electrical Specifications23K Cooling only including models Power Supply Cord Tips Before InstallationUnit Operation Hazard Ground Installation InstructionsPersonal INJURY/UNIT Operation Hazard Select the Best LocationUnit Damage Hazard Assembly of the side shutters curtains to the cabinetComplete the installation Reinstalling Front Panel AssemblySecure Shutters Drain Hose Storm Window ApplicationsWall Installation Location Wall InstallationPersonal Injury Hazard Masonry ConstructionOperating Instructions How to Use Remote ControlAir Filter Removal Care and MaintenanceTroubleshooting Guide Cleaning the Air FilterCarrier will not be Responsible for Carrier Room AIR Conditioner Full WarrantyIf Your Unit does not WORK, Follow These Steps in Order Catalog NoOMKCKH---2 Instrucciones de Instalación y funcionamiento Contenido Introducción Precauciones DE SeguridadRiesgo DE Descarga Eléctrica Especificaciones EléctricasNota 10K-14K modelos Sólo con enfriamiento 23K Riesgo DE Operación Errática DE LA Unidad Consejos Para Antes DE LA InstalaciónCable Eléctrico Aperturas de la ventana Instrucciones DE InstalaciónRiesgo DE Operación Errática DE LA Unidad Y Lesiones Paso 1-Seleccione la mejor ubicación posiblePaso 3-Montaje del canal inferior y superior en la caja Serpentín Chasis TiradorPaso 8-Vuelva a instalar el panel frontal Riesgo DE Daño a LA UnidadPaso 6-Instalación de la caja Paso 7-Fije las persianasEl instalador tendrá que suministrar y cortar la tabla Instalaciones CON Contraventana8 pulg. mín Instalación EN LA ParedRiesgo DE Lesiones Personales Instalación del marcoInstrucciones DE Funcionamiento Construcción EN MamposteríaModo de empleo Mando a distanciaLimpieza del filtro de aire Solución DE ProblemasCuidado Y Mantenimiento Desmontaje del filtro de aireCarrier no Será Responsable POR Nº de catálogo OMKCKH---2 MOT D’ACCUEIL AU Propriétaire DE CET Équipement Table DES Matières Introduction Pour Votre SécuritéRisque D’ÉLECTROCUTION Caractéristiques ÉlectriquesCordon Électrique Vis 3/4 poVis 1/4 po Rondelle Rail inférieurLatéral Obstacle Sol Étape 1-Choix de l’endroit le plus appropriéÉtape 5-Pose des supports de montage et du premier joint Vis Philips côté droitÉtape 3-Pose des rails supérieur et inférieur du boîtier Étape 4-Pose des volets latéraux rideaux au boîtierÉtape 9-Calfeutrage Étape 6-Pose du boîtierÉtape 7-Pose des volets Étape 8-Pose du panneau avantInstallation SUR UN Contrechâssis Intercalaire Fourni PAR LinstallateurA06740 Installation MuraleRisque DE Blessures Corporelles Pose du cadreMaçonnerie Mode D’EMPLOIMode d’emploi de la télécommande TélécommandeEntretien de fin de saison Entretien ET MaintenanceDépose du filtre Nettoyage du filtre à airCarrier NE Pourra Être Tenu Responsable DE

KC_141P, KH_233P, KC_223P, KC_233P, KC_183P specifications

Carrier has made significant strides in the HVAC industry with its innovative series of air conditioning systems, particularly the KH_123P, KC_183P, KC_233P, KC_223P, and KH_233P models. These models are a testament to Carrier's commitment to delivering advanced technology, energy efficiency, and enhanced comfort in climate control.

The KH_123P model is a compact ductless system that provides effective cooling and heating solutions for residential spaces. With its sleek design, it seamlessly integrates into any home decor. The unit features advanced inverter technology, allowing for variable speed operation that adjusts to the cooling demand, significantly reducing energy consumption. It also boasts low ambient cooling capability, making it ideal for use in various climates.

Next, the KC_183P and KC_233P models are designed for medium to large spaces, providing powerful climate control with a focus on quiet operation. Both models are equipped with high-efficiency scroll compressors that ensure reliable performance while minimizing noise levels. Additionally, these units feature multiple fan speeds and advanced air filtration systems, which improve indoor air quality by capturing dust, allergens, and other pollutants.

The KC_223P model stands out for its smart technology integration. It supports Wi-Fi connectivity, allowing users to control the system remotely via a smartphone app. This feature enables scheduling, temperature adjustments, and monitoring of energy usage from virtually anywhere. The KC_223P also includes precise temperature control and zoning capability, creating comfort zones tailored to individual preferences throughout the home or office.

The KH_233P model further enhances energy efficiency with its EcoMode setting, which optimizes performance for lower energy consumption during periods of low activity. This model is also equipped with advanced diagnostics and self-cleaning functions, reducing maintenance needs and extending the unit's lifespan.

All of these Carrier models come with a robust warranty and are backed by Carrier’s storied reputation for quality and innovation. With their blend of advanced technology, efficiency, and user-friendly features, the KH_123P, KC_183P, KC_233P, KC_223P, and KH_233P systems are stellar choices for anyone looking to enhance their indoor climate comfort. Carrier continues to set the standard in the HVAC sector through these versatile and high-performing solutions.
Top Page Image Contents