Dremel 670 manual Operating Instructions, Types of Cuts, Directional Guide

Page 9

5716 Dremel 2.625x4.25 6/18/02 10:31 AM Page 16

Operating Instructions

TYPES OF CUTS

The saw blade provided with your attachment is for both cross cuts and rip cuts. Ripping is cutting lengthwise, with the grain of the wood. Cross cutting is cutting against the grain.

Your rotary tool should be running at the set speed before starting the cut, and turned off only after completing the cut.

Primarily for use on wood or wood-like materials. Other materials may cause blade to wear out prematurely. Not for use on metal or masonry.

DIRECTIONAL GUIDE

Feed direction for the rotary tool is right to left only.

For a straight 90° cut, use the directional guide on the left side of the guard to guide your cut. This guide also shows feed direction. Make sample cuts in scrap lumber to verify line of cut. For minimum splintering, place the good side of the material face down.

Maximum depth of cut is 1/4". Not for cutting radii, curves or bevels.

!WARNING Always be sure that hands or fingers do not

interfere with the free movement of the lower guard.

Maintain a firm grip. Never force the rotary tool. Use light and continuous pressure.

When cutting across the grain, the fibers of the wood have a tendency to tear and lift. Advancing the saw slowly minimizes this effect.

! WARNING Clean lower guard frequently to assure a

rapid return of lower guard.

!WARNING This attachment is not intended for abrasive cut

off wheels. Standard Dremel wheels will not fit on mandrel.

16

17

Image 9

Contents Dremel 2.625x4.25 6/18/02 1029 AM Safety Rules for Mini Saw Attachment Power Tool Safety RulesKeep hands Cutting areaCauses and Operator Prevention of Kickback Name SymbolsFunctional Description and Specifications Mini SAW Attachment Installation AssemblyInstall the drive adapter on the motor shaft and tighten Blade AssemblyTo prevent damage to tool Dremel 2.625x4.25 6/18/02 1031 AM Types of Cuts Operating InstructionsDirectional Guide Feed direction for the rotary tool is right to left onlyService MaintenancePerformed by a Dremel Service Facility Cutting Large SheetsCleaning Certain cleaning agentsCare of Blades Garder les mains éloignées Garder CES InstructionsCauses ET Prévention DU Recul PAR L’UTILISATEUR Recul Nom SymbolesDescription fonctionnelle et spécifications Installation D’INSTRUMENTS SUR LA MINI-SCIEAssemblage Capacité maximum Lame 1-1/4 po 31,8 mm Alésage centralDremel 2.625x4.25 6/18/02 1035 AM Assemblage DE LA Lame Pour éviter d’endommager’outil, ne pas trop serrer Dremel 2.625x4.25 6/18/02 1035 AM Mode d’emploi Genres DE CoupesGuide Directionnel Lubrification DE L’OUTIL LA Coupe DE Grandes FeuillesNettoyage De l’ammoniaque’ENTRETIEN DES Lames Lea y entienda todas las Guarde Estas InstruccionesInstrucciones. No seguir las Mantenga las manos lejosDremel 2.625x4.25 6/18/02 1037 AM Símbolos ContragolpeNombre Para uso con los modelos Dremel 275, 285, 395, 398 y Descripción funcional y especificacionesEnsamble Instalacion DEL Acople DE MinisierraPaso 2. Remueva el collarín HerramientaEnsamble DE LA Cuchilla Daño a laDremel 2.625x4.25 6/18/02 1037 AM Tipos DE Corte Instrucciones de operaciónGuia Direccional Corte DE Hojas GrandesServicio MantenimientoLubricacion DE LA Herramienta ContregolpeLimpieza Para evitarCuidado DE LAS Cuchillas Dremel 2.625x4.25 6/18/02 1037 AM 2610914192