Baum Bros. Imports 26.4 manual Example Variation 3, selection 3 Four trim cut with labels

5.0 Automatic Operation

Block Programming

Example: Variation 3, selection : 3 Four trim cut with labels

1.	Select	"Four trim cut with labels"
2.	Menu:	1 Orig. sheet size
		2 Sheet size tables
		3 Lay guide lft / ri

With this menu it is able to enter the original sheet size manually or to select a sheet size from a sheet size table.

3.e.g.: Enter Orig. sheet size

4.Enter Original sheet size X, confirm with key

5.Enter Original sheet size Y, confirm with key or

6.e.g.: Sheet size tables

7.Select left-hand lay side (=default) or right-hand lay side: Example: Select right-hand lay side by means of key

8.Select desired sheet size by means of the cursor keys and confirm with key

Confirm the sheet orientation or turn sheet orientation (observe paper grain)

Menu:	1 Sheet orientation OK
	2 Turn sheet

9.e.g.: Sheet orientation OK:

To be continued with next page!

Four trim cut with labels

K5B - 14