Assembly and Adjustment, Features FIG. a

ENGLISH

designed for your saw, for optimum performance and safety of operation.

•Don’t unplug if plug or receptacle is wet. Disconnect the fuse or circuit breaker that supplies power to the tool. Then unplug and examine for presence of water in the receptacle.

•Wait for the saw to come to a complete stop. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its pathBe. aware of the time it takes for the blade to stop after switch is released.

•Never use any blades with expansion or segmented (toothed) rimsThis. tool is not equipped with a lower guard.

•The tool is intended to be used with diamond wheels only. Do not use with abrasive discs, carbide tip blades or stamped tip blades.

•Use only accessories rated at least equal to the maximum speed marked on the tool.”

WARNING:Always use eye protectionAll. users and bystanders must wear eye protection that conforms to ANSI Z87.1.

WARNING: Keep hands away from cutting area and blade. Personal injury may result.

WARNING: Always plug extension cord into a GFCI protected outlet.

WARNING:To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet ha

WARNING: Never use saw with salt water or a conductive fluid.

WARNING: Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Wear protective clothing and wash exposed areas with soap and water.Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection

appropriate for the dust exposure. Direct particles away from face and body.

WARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. All users and bystanders MUST ALWAYS wear certified safety equipment:

•ANSI Z87.1 eye protection (CAN/CSA Z94.3),

•ANSI S12.6 (S3.19) hearing protection,

•NIOSH/OSHA/MSHA respiratory protection.

WARNING: Wear appropriate hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

INTENDED USE

These tile cutters are designed for professional tile cutting applications. DO NOT use under wet conditions or in presence of flammable liquids or gases. These tile saws are professional power tools. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

FEATURES (FIG. A)

1.	On / off switch	4.	Base	6.	Socket wrench
2.	Lock-on button	5.	Brush Cap	7.	Spanner
3.	Depth-of-cut adjustment lever

ASSEMBLY AND ADJUSTMENT

WARNING: Prior to assembly and adjustment always unplug the tool.

FITTING & REMOVING THE DIAMOND WHEEL (FIG. C) - AVAILABLE ONLY FOR TC1200

Fitting

•Insert the diamond wheel (9) to the spindle.

•Grip outside flange with spanner (7) and turn socket wrench (6) counterclockwise. WARNING: Be sure to tighten clamp bolt securely.

WARNING: Use only the recommended diamond wheel with the correct hole size. Removing

•Follow the procedure above in reverse order.

CUTTING DEPTH ADJUSTMENT (FIG. D)

•To increase or decrease the depth of cut, loosen by pulling the Depth-of-cut adjustment lever (3) down.

•For minimum depth of cut, move/slide wing nut towards the "-" sign.

•To increase the depth of cut, move adjustment lever upwards, away from the base.

•At the desired depth of cut, secure the base by tightening the adjustment lever.

•At anytime, the depth-of-cut adjustment knob can also be set to a desired position to suit the user.

TC1100, TC1200 specifications

The Black & Decker TC1200 and TC1100 are two innovative power tools that showcase the brand's commitment to quality and user-friendly design. Both models are part of the Black & Decker lineup, known for their efficiency and versatility, catering to both DIY enthusiasts and professional users.

The TC1200 is equipped with a robust motor that delivers impressive torque, making it suitable for a wide range of applications. This model features a variable speed control, allowing users to adjust the speed according to the task at hand. This capability ensures precision when working on different materials, from wood to metal, significantly enhancing the overall performance of the tool. Additionally, the TC1200 boasts an ergonomic handle designed for comfort, reducing hand fatigue during prolonged use.

On the other hand, the TC1100 model provides an equally impressive performance but is tailored for lighter tasks. While it may not have all the features of the TC1200, its compact design makes it an ideal choice for users who prioritize portability without sacrificing power. With a reliable motor and a user-friendly interface, the TC1100 simplifies tasks such as assembling furniture, completing home repairs, or crafting projects.

Both models are designed with durability in mind, featuring high-quality components that ensure longevity and resistance to wear. They also incorporate safety features such as overload protection, which prevents the tool from overheating, thereby extending its life and maintaining optimal performance.

Among the standout characteristics of the TC1200 and TC1100 is their versatility. Each tool comes with a variety of attachments, making them suitable for numerous applications. Whether drilling holes, driving screws, or performing detailed tasks, these power tools can handle it all with ease.

Furthermore, both models are compatible with Black & Decker’s range of rechargeable batteries, providing excellent runtime and reducing downtime during projects. This compatibility with batteries not only enhances their convenience but also aligns with the environmentally conscious approach of modern power tool design.

In conclusion, the Black & Decker TC1200 and TC1100 are exemplary power tools that combine advanced features with practicality. Their unique characteristics, user-friendly technologies, and robust build make them essential additions to the toolkit of any DIY enthusiast or professional tradesperson. Whether one seeks power, efficiency, or portability, Black & Decker’s TC series stands out as a reliable choice for completing various tasks effectively.