Craftsman 509399, 509398 owner manual Saw Safety Instructions, Workpiece Safety Instructions

Page 8

Safety

Saw Safety Instructions

1.Use guard, pawls and riving knife accord- ing to instructions. Keep them in working order.

2.Routinely check saw for broken or dam- aged parts. Repair or replace damaged parts before using saw. Check new or repaired parts for alignment, binding, and correct installation.

3.Unplug saw before doing maintenance, making adjustments, correcting alignment, or changing blades.

4.Do not force saw. Use saw, blades and accessories only as intended.

5.Have yellow key out and saw switched off before plugging in power cord.

Workpiece Safety Instructions

1.Cut only wood, woodlike or plastic materials. Do not cut metal.

2.Cut only one workpiece at a time. Stack- ing or placing workpieces edge to edge can cause user to lose control of workpiece.

6.Before turning on saw, clear table of all objects except workpiece to be cut and nec- essary fixtures, clamps, or feather-boards.

7.If blade jams, turn saw off immediately, remove yellow key, then free blade. Do not try to free blade with saw on.

8.Turn saw off if it vibrates too much or makes an odd sound. Correct any problem before restarting saw.

9.Do not layout, assemble, or setup work with saw on, or while blade is spinning.

10.Keep saw table clean.

11.Store items away from saw. Do not climb on saw or stand on saw table to reach items because saw can tip over.

8

Image 8
Contents Inch Radial SAW Guard KIT Table of Contents Safety Safety Symbol and Signal WordsRead and follow all safety information and instructions Major HazardsKickback Hazard Guard Function and Features Guard Features IncludeHazards Associated with Clear Por- tion of Guard Work Area Safety Instructions Safety InstructionsPersonal Safety Instructions Saw Safety Instructions Workpiece Safety InstructionsBlade Safety Instructions On-Product Safety Labels Safety List of loose parts with model AssemblyIdentify Parts Remove Sawblade and Guard Remove Original Table Boards, and Mounting SupportsPositioning Table Supports Installing Front Table Make Front Table Flat Reposition U-Clip to New Hole Location Leveling Front Table Assembly Making Front Table Flat X 13 Lock Nut Assembly Assembly Installing Guard Adapter Installing Blade/Squaring Crosscut Travel Framing Square Must Be TrueInstall Fence, Rear Tables, and Table Clamps Install GuardGuard Installation Steps/Align Riving Knife to Blade AlignmentControls Requires yellow keyLock before ripping Blade partially protects against Control Function Guard Tab Crosscutting Defined Crosscutting SafetyCrosscutting Crosscut Kerfs Keep one hand on saw handle through stepMaking Crosscuts Repetitive Crosscutting Ripping Workpiece Positioning Push Sticks and Push BlocksKickback To reduce risk of kickback Wrong Way FeedHold Down Function Pawls and Riving Knife FunctionRipping Set-up Procedure Follow these steps before rippingRemove workpiece from table Ready push stick or push block Making Rip CutsIn-Ripping Ripping Hints Dado Blades, Molding HeadsEdging Cutting Aides Auxiliary Fence Making the HandlePutting it together Featherboard This Side Replacing Pawls MaintenanceClean sawdust from the slot and slider Key Description Repair Parts#509398 & #509399 Repair Parts Guard RZQHU·V Inch Radial SAW Guard KIT Pdqxdo