![](/images/new-backgrounds/1209511/20951135x1.webp)
STOW CS4030 SAW — OPERATION AND SAFETY DECALS
Machine Safety Decals
The STOW CS4030 SAW is equipped with a number of operation and safety decals.These decals are provided for operator safety and maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.
P/N 37744
P/N 37515
P/N 36099 (ISO Blue)
CAUTION
When Larger Blade and Guard is Installed, Belt Drive MUST Be Changed to Proper Size. See Owners Manual.
FAILURE TO COMPLY WITH THE C C AH
JADV EEE AV EEA OIEJGGVCBVVZ
S.M.I. MASONRY AND CONCRETE
SAW MANUFACTURER’S INSTITUTE
P/N
WARNING
Inhaling exhaust fumes can result in severe injury or death.
Only operate machine in well- ventilated areas.
DO NOT inhale exhaust fumes.
DANGEROUS | Only qualified personnel should |
FUMES | install, use, or service this equipment. |
| P/N 36090 |
P/N 36090
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfromchemically
treatedlumber.
Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
P/N 20525
WARNING |
DIESEL FUEL can cause |
fire or explosion. |
Stop engine before fueling |
Keep cigarettes, sparks |
and flame away. |
P/N 36092 |
P/N 36092
WARNING
TO PREVENT SERIOUS INJURY
DO NOT OPERATE SAW WITHOUT PROPER TRAINING & FULL UNDERSTANDING OF THE OWNERS MANUAL
WHEN OPERATING THIS MACHINE
KEEP ALL
GUARDS IN
PLACE
ALWAYS WEAR SAFETY APPROVED
HEARING
PROTECTION
EYE OR FACE
PROTECTION
HEAD
PROTECTION
RESPIRATOR
SMI MASONRY AND CONCRETE SAW MANUFACTURING INSTITUTE
P/N
WARNING! WARNING!
PATENT PENDING
P/N 11912
MODEL
SERIAL NO.
CONTACT
SERVICE
DEPARTMENT
P/N M600002
KEEP FEET |
CLEAR |
P/N |
USE 15W- 40 ENGINE OIL |
API SERVICE CI- 4 PLUS, CI- 4, CH- 4, |
CG- 4, CF- 4, CF/SL/SJ |
P/N 37540 |
P/N 37540 |
P/N 606004
P/N 13118
KEEP HANDS |
|
|
| TATI | O | |
|
| O | ||||
CLEAR |
| R |
|
|
| N |
|
|
|
|
| ||
|
|
|
|
|
| |
P/N | P/N 25491 | |||||
|
|
|
|
| ||
|
|
|
| TATI | O | |
|
|
| O |
| ||
|
| R |
|
| N | |
|
|
|
|
|
| P/N 25678 |
| P/N 37161 |
P/N 21302 | P/N 37161 |
|
LUBRICATION | HOT | CHECK | BELT DRIVE |
P/N 11246
Figure 3. STOW CS4030 SAW Decals
PAGE 18 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)