Stow cs403020, cs403026, cs 403016, cs403030 operation manual Hydraulic System Drains

1. Hydraulic Reservoir

2. Filter

3.Pump

4. Lift Cylinder

5. Wheel Motor

6. EngineTilt Cylinder

7.Motor

8.Pump Body

STOW CS4030 SAW — MAINTENANCE

1

3

2

7

6

5 8

5

4

Figure 65. Hydraulic System

3.Collect and dispose the used oil (and filter) in accordance with ordinances and regulations of your area.

4.Remove used oil filter.

5.After oil is drained, reinstall drain plug.

6.Pre-fill and install a new oil filter.

1 2

3

Figure 66. Hydraulic System Drains

CAUTION

To prevent hydraulic pump damage, pre-fill the filter with oil prior to installing it.

7.Add oil to the system reservoir.

8.The reservoir will need to be filled several times.

1. Place an oil drain pan beneath the Blade Shaft drain plug.	9. Run the engine for 1-2 minutes to cycle the oil throughout
	the system.

2.Remove the drain plug from the bottom of the Blade Shaft Housing.

10.Add oil as required.

11.Repeat process until oil level is stable after running engine.

PAGE 54 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)