Stow cs403026, cs 403016, cs403020, cs403030 operation manual Training Checklist

TRAINING CHECKLIST

TRAINING CHECKLIST

This checklist lists the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist when training a new operator or use as a review for more experienced operators.

TRAINING CHECKLIST

NO.	DESCRIPTION	OK?	DATE
1	Read Operator’s Manual completely.
2	Machine layout, location of components, checking of engine and hydraulic oil levels.
3	Fuel system, refueling procedure.
4	Operation of spray and lights.
5	Operation of controls (machine not running).
6	Safety controls, safety stop switch operation.
7	Emergency stop procedures.
8	Startup of machine, pre-heat, engine choke.
9	Forward and Reverse Travel.
10	Starting a cut.
11	Pavement Cutting techniques.
12	Stopping a cut.
13	Re-start after stopping blade within work surface - explanation.
14	Shutdown of machine.
15	Lifting of machine (lift loops).
16	Machine transport and storage.

Operator _________________________________________ Trainee __________________________________________

COMMENTS:

PAGE 8 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)