Graco 258864, 258880 important safety instructions 3A0705E

Page 1

Operation

TrueCoatPro and TrueCoatPlus

Cordless Paint Sprayers

3A0705E

EN

-For portable spray applications of water-based and oil-based (mineral spirit-type) architectural paints and coatings only -

-Not for use in explosive atmospheres -

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and instructions in this manual. Save these instructions.

Models 258864, 258880

Maximum Working Pressure 2000 psi (137 bar, 13.7 MPa)

WARNING

Use only water-based or oil-based (mineral spirit-type) materials with flash point greater than 100° F (38° C). Do not use materials which state “FLAMMABLE” on the packaging. For more information about your material, request MSDS from distributor or retailer.

Use oil-based material outdoors or in a well-ventilated indoor area with a flow of fresh air.

Spraying certain materials may cause static build-up in the sprayer that can result in static shock to the user. If this occurs, first ensure the material has a flash point greater than 100° F (38° C) and does not state that it is FLAMMABLE anywhere on the package. If still feeling a static shock, the material likely con- tains a non-mineral spirits fluid such as, but not limited to, xylene, toluene, or naphtha, which can build up static. Switch to an alternative material.

Image 1
Contents 3A0705E Table of Contents Fire and Explosion Hazard Battery Hazard Component Identification Trigger Lock Pressure Relief ProcedurePrime/Relief Valve Position Charger Status Indicator Lights Charging the BatterySprayer Status Indicator Installing Suction Tube SetupInstallation Cleanup/StorageSprayer Setup Starting a New Job or Refilling the Cup MaterialsReversible Tip Selection Chart Install Tip/Guard Assembly if not installedAiming Sprayer Triggering SprayerUnclogging Spray Tip/Guard Assembly Flushing Sprayer Shutdown and CleaningWater or flushing fluid. a soft brush can be used to Storage Cleaning Sprayer ExteriorTips Ref. Part Description Replacement Parts and KitsProblem Cause Solution TroubleshootingReplace tip. See Install Tip/Guard Assem Spray Pattern Diagnostics Problem Cause SolutionSpray pattern spits at Alternate Priming Method Removal Inlet Valve CleaningSprayer Technical DataGraco Information Graco Standard Warranty