Graco 258864, 258880 important safety instructions Technical Data, Sprayer

Page 23

Technical Data

Technical Data

Sprayer:

Maximum working pressure

137.8 bar, 13.7 MPa (2000 psi)

 

 

Weight

2.87 kg (6.32 lb)

 

 

Dimensions:

 

 

 

Length

33.6 cm (13.25 in.)

 

 

Width

12.7 cm (5.0 in.)

 

 

Height

26.4 cm (10.375 in.)

 

 

Storage temperature range ◆❖

0° to 50° C (32° to 122° F)

 

 

Operating temperature range

4° to 32° C (40° to 90° F)

 

 

Storage Humidity Range

0% to 95% relative humidity, non-condensing

 

 

Sound Pressure Level

79.5 dBa† (for sound power level, add 11 dBa)

 

 

Vibration Level Acceleration

Less than 2.5 m/s2 (8.2 feet/s2)††

Charger:

 

 

 

Charging Time

45 - 75 minutes

 

 

Power Source

120 VAC

 

 

Battery:

 

 

 

Voltage

18 VDC, Lithium Ion

 

 

Capacity

2.4 Ah, 43.2 Wh

 

 

Pump damage will occur if fluid freezes in pump.

Damage to plastic parts may result if impact occurs in low temperature conditions.

Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.

† per ISO 3744 measured at 3.1 feet (1m) †† per ISO 5349, no load condition

3A0705E

23

Image 23
Contents 3A0705E Table of Contents Fire and Explosion Hazard Battery Hazard Component Identification Prime/Relief Valve Position Pressure Relief ProcedureTrigger Lock Sprayer Status Indicator Charging the BatteryCharger Status Indicator Lights Cleanup/Storage SetupInstalling Suction Tube InstallationSprayer Setup Starting a New Job or Refilling the Cup MaterialsReversible Tip Selection Chart Install Tip/Guard Assembly if not installedAiming Sprayer Triggering SprayerUnclogging Spray Tip/Guard Assembly Flushing Sprayer Shutdown and CleaningWater or flushing fluid. a soft brush can be used to Tips Cleaning Sprayer ExteriorStorage Ref. Part Description Replacement Parts and KitsProblem Cause Solution TroubleshootingReplace tip. See Install Tip/Guard Assem Spray Pattern Diagnostics Problem Cause SolutionSpray pattern spits at Alternate Priming Method Removal Inlet Valve CleaningSprayer Technical DataGraco Information Graco Standard Warranty