Pressure Control Board
Pressure Control Transducer
Removal
Relieve pressure; page 9. Wait 5 minutes before servicing.
1.Remove four screws (38) and cover (96). 96
38
ti13493a
2.Disconnect transducer connector (E) from motor control board (95).
E
4.Remove four screws (39) and control box (61). Allow control panel (68) to hang down freely.
ti7458a
68
39ti13494a
61
5.Remove grommet (40) from control box then remove transducer (86) and
ti7260a
40 67
86
ti12999a
95
20 ti13495a
3.Disconnect potentiometer connector (C) from motor control board.
6.Remove grommet (40) from transducer and save for reuse.
40
ti13495a
ti12997aC
28 | 311365G |