Graco Inc 307-638, 218-026, PRO4000 manual Accessories

Page 30

ACCESSORIES

Accessories must be purchased separately.

Use only GENUINE GRACO PARTS AND ACCESSORIES.

WARNING

NEVER operate your equipment at a working pressure rating that is higher than the lowest rated component in your system. Lower rated components may not be able to withstand the pressure developed by the pump and may rupture, causing serious bodily injury or property damage.

The accessories in the box, below, are approved by Factory Mutual.

GROUNDED AIR SUPPLY HOSE

FLUID HOSE ASSEMBLIES (Nylon)

7 bar (100 psi) MAXIMUM WORKING PRESSURE

35 bar (500 psi) MAXIMUM WORKING PRESSURE

6.35 mm (0.25 in.) ID, 1/4 npsm(fbe)

6.35 mm (0.25 in.) ID, 3/8 npsm(fbe)

220±444

1.2 m (4 ft)

216±076

8 m (25 ft)

218±100

5 m (15 ft)

216±077

15 m (50 ft)

218±101

8 m (25 ft)

216±078

23 m (75 ft)

218±102

11 m (36 ft)

216±079 30 m (100 ft)

218±103

15 m (50 ft)

216±080 46 m (150 ft)

220±119

23 m (75 ft)

WARNING SIGNS

220±120

30.5 m (100 ft)

Available from Graco at no extra charge.

FLUID HOSE ASSEMBLIES (Nylon)

Must be ordered separately.

14 bar (225 psi) MAXIMUM WORKING PRESSURE

180±060

Warning Sign (English)

180±061

Warning Sign (French)

6.35 mm (0.25 in.) ID, 3/8 npsm(fbe)

180±062

Warning Sign (German)

215±637

8 m (25 ft)

180±063

Warning Sign (Spanish)

215±638

15 m (50 ft)

 

 

215±639

75 ft (23 m)

 

 

215±640 100 ft 30.5 m)

 

 

215±641 150 ft (46 m)

 

 

ACCESSORIES

The accessories below and on page 31 have not been tested by Factory Mutual.

AIR LINE ACCESSORIES

GROUNDED AIR SUPPLY HOSE

7 bar (100 psi) MAXIMUM WORKING PRESSURE

8 mm (0.315 in.) ID; 1/4 npsm(fbe);

Color coded gray; More flexible than black hose

223±068

1.2 m (4 ft)

223±069

5 m (15 ft)

223±070

8 m (25 ft)

223±071

11 m (36 ft)

223±072

15 m (50 ft)

223±073

23 m (75 ft)

223±074 30.5 m (100 ft)

QUICK DISCONNECT COUPLING ASSY. 110±806

Includes a quick disconnect coupling insert, which replaces air inlet fitting 179±400, and a shut-off coupling body (left hand thread), which connects to the grounded air hose.

AIR HOSE ADAPTER 185±493

For connecting two or more air supply hoses together. 1/4 npt(m) x 1/4 npsm(m) left±hand thread.

HIGH VOLUME AIR REGULATOR 206±199

0±9 bar (0±125 psi) Regulated Pressure 14 bar (200 psi) Steel Pressure Gauge 1/2 npt(f) inlet and outlet

AIR FILTER & MOISTURE SEPARATOR 106±148

17.5bar (250 psi) MAXIMUM WORKING PRESSURE For cleaning and drying air in air spray system.

20 micron element, 5 oz. bowl capacity, 3/8 npt(f) inlet and outlet

3￿ 3￿7￿638

Image 30
Contents Part Number 218±026, Series E Manual MID±RANGE ElectrostaticRev. AE Read and Retain for Reference Table of Contents TermsHose Safety Equipment Misuse HazardHazardous Fluid Hazard Fire or Explosion Hazard Flushing and Cleaning SafetyVentilate the Spray Booth HOW the Electrostatic AIR Spray GUN WorksTypical Installation NON±HAZARDOUS Area Hazardous AreaKEY Installation Ventilate the Spray BoothConnect the Fluid Line Refer to the Typical Check the Electrical Grounding See Fig Filter the Fluid Operating ChecklistOperation Spraying OperationInstall the Fluid Nozzle and Air Cap Adjust the Spray PatternClean the Air Cap and Fluid Nozzle MaintenanceDaily Care and Cleaning Follow the Pressure Relief Procedure Warning onFlush the Spray Gun Spray Pattern Troubleshooting Chart Problem Cause Solution Improper Spray PatternGUN Operation Troubleshooting Chart Problem Cause SolutionElectrical Troubleshooting Chart Test Power Supply Resistance Test Gun ResistanceTest Resistor Stud Resistance Gun Disassembly Electrode ReplacementResistor Stud Replacement Fluid Needle Packing Replacement Barrel Removal45f Service45d 45cPower Cartridge Replacement 18b3c 2 3a Turbine Alternator Removal Fan Air Valve Replacement Air Valve ReplacementMuffler and Check Valve Replacement ES ON±OFF Valve Removal & ReplacementFluid Adjusting Screw Replacement KEY81Ref No 59, Tool Kit Ref No Power CartridgeParts Drawing Includes items 59a±59h 59f 59e 59d 59g 59c 59b59a179±400 Parts List218±014 HANDLE, gun Includes item 2a 18b 186±127Repair Kits HOW to Order Replacement Parts Technical DataService Information Assembly Changed Status No. Part No NameAccessories 218±124 Electrostatic System Filter AIR or Paint 202±271218±123 Electrostatic System PRO4000H GUN Electrostatic High Conductivity KIT 222±029Graco PRO4000 Warranty and Disclaimers Important Phone Numbers