Graco Inc 248083, 248082, 248084 manual 309915D, Model

Page 1

Operation

TexSpray GTX™ 2000

US Patents D502,532; 7,114,664	309915D

- For Water-Based Materials Only-

Model: 248082

Sprayer with Graco Trigger Gun

120 psi (8.27 bar) Maximum Working Air Pressure

120 psi (8.27 bar) Maximum Working Fluid Pressure

Model: 248083

Sprayer with Graco Flex Gun

120 psi (8.27 bar) Maximum Working Pressure

120 psi (8.27 bar) Maximum Working Fluid Pressure

Model: 248084

Sprayer with Graco Pole Gun

120 psi (8.27 bar) Maximum Working Pressure

120 psi (8.27 bar) Maximum Working Fluid Pressure

Read all warnings and instructions.

WLE

308479

310616 model 248082

308603 model 248083 and 248084

309916

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

Copyright 2003, Graco Inc. is registered to I.S. EN ISO 9001

Image 1

Contents Model 309915DCarbon Monoxide Hazard Fire and Explosion HazardEquipment Misuse Hazard 309915DPressurized Equipment Hazard Burn HazardComponent Identification Component Identification Pressure Relief Procedure Removing & Installing Hopper SetupRemoving Hopper G Installing Hopper G PreparationRemoving Compressor Power Pack Z Compressor Power PackRunning Compressor Remotely Push compressor power pack Lift and turn motor lock knob Reinstalling Compressor Power Pack ZWetting Hose Wetting System End of Material Thickness Consistency Oughly mixed, gently set ballUse water-based materials Slowly add one bag of texturePressure Relief Procedure Fuel Specifications Refueling ProcedureFueling That you are not using when Plug installed in opening K orAlways have material outlet There is material in hopper. IfStarting Gas Engine StartupSpray Techniques Application Nozzle Orifice Nozzle No Air VolumeNozzle Selection Adjustment If flow adjustment nut will not System AdjustmentSee Nozzle Selection, Turn, check to see if it isCompressor Power Pack Performance When you have finished spraying Shutdown and CleanupEnglish Relieve Pressure,Maintenance Technical Data Additional Warranty Coverage Warranty