Setup
K L
| T | 23 |
|
| |
|
| closed |
plug | U |
|
|
| ti4005a |
ti3787a | ti3910a |
|
|
| |
• Always have material outlet | • Compressor air pressure is con- | • Gun air pressure is regulated using air pressure control on sprayer (U) |
plug installed in opening (K or | trolled with the pressure control | as well as gun air valve located on gun handle (23). The site gage on |
L) that you are not using when | knob (T) and displayed on gage. | sprayer enables duplication of air pressure setting. The gun air valve |
there is material in hopper. If |
| (23) allows for additional air pressure adjustment. |
plug is removed, hopper will |
|
|
drain out. |
|
|
• also |
|
|
Always have material hose |
|
|
installed in the opening (K or L) |
|
|
when there is material in hop- |
|
|
per. If hose is removed, hopper |
|
|
will drain out through pump. |
|
|
14 | 309915D |