Graco Inc 248083 Shutdown and Cleanup, When you have finished spraying, English, Relieve Pressure

Page 19

Shutdown and Cleanup

Shutdown and Cleanup

CAUTION

English

•Turn off sprayer if you are going to stop spraying for 5 minutes or longer.

•Before removing material hose relieve pressure and material is not in hose.

•To keep sprayer in good operating condition, always clean it thoroughly and prepare it properly for storage.

•If water freezes in sprayer, damage may occur. Inn cold weather store sprayer where it will not freeze.

ti4288a

When you have finished spraying:

1Relieve Pressure, page 6.

2Fill material hopper with 2-4 gallons of clean water.

3 Spray inside material hopper	Spray water into waste bucket to
to circulate water through gun	empty material hopper.
and hose. While circulating
water, use gun to clean mate-	NOTE: A soft brush can be used to
rial hopper.	loosen dried on material

4Follow Pressure Relief, page 6.

309915D

19

Image 19

Contents Model 309915D309915D Fire and Explosion HazardCarbon Monoxide Hazard Equipment Misuse HazardPressurized Equipment Hazard Burn HazardComponent Identification Component Identification Pressure Relief Procedure Preparation SetupRemoving & Installing Hopper Removing Hopper G Installing Hopper GRemoving Compressor Power Pack Z Compressor Power PackRunning Compressor Remotely Push compressor power pack Lift and turn motor lock knob Reinstalling Compressor Power Pack ZWetting Hose Wetting System Slowly add one bag of texture Consistency Oughly mixed, gently set ballEnd of Material Thickness Use water-based materialsPressure Relief Procedure Fuel Specifications Refueling ProcedureFueling There is material in hopper. If Plug installed in opening K orThat you are not using when Always have material outletStarting Gas Engine StartupSpray Techniques Application Nozzle Orifice Nozzle No Air VolumeNozzle Selection Turn, check to see if it is System AdjustmentAdjustment If flow adjustment nut will not See Nozzle Selection,Compressor Power Pack Performance Relieve Pressure, Shutdown and CleanupWhen you have finished spraying EnglishMaintenance Technical Data Additional Warranty Coverage Warranty