Graco Inc 248082, 248083, 248084 manual Technical Data

Page 21

Technical Data

Technical Data

Maximum working air pressure Maximum working fluid pressure Air pressure operating range Compressor specifications

Air Displacement Air Delivery

Engine

Gas capacity Oil capacity

Hopper capacity

Maximum deliver with texture material Dimensions

Length

Width

Height

Weight

With hoses or gun Without hoses and gun

Without hoses and gun and compressor power pack

Compressor power pack only Wetted parts

Sound data

Sound pressure level*

Sound power level#

*Measured while spraying at 1 m. #Measured per ISO-3744

120 psi (8.27 bar)

120 psi (8.27 bar)

25 to 120 psi (1.7 to 8.27 bar) Oilless compressor 24 CFM (680 lpm)

12 CFM @ 100 psi (340 lpm @ 6.9 bar) 5.5 HP Honda OHV

0.95US gallons (3.6 liters)

0.63US quarts (0.60 liters) 17 US gallons (64 liters)

4.0gpm (15.14 lpm)

38 in. (965 mm) with handles

24 in. (610 mm)

40 in. (1016 mm)

185 lb (83.91 kg)

165 lb (74.84 kg)

90 lb (40.82 kg)

75 lb (34.02 kg) PVC, zinc plate CS, Buna-N, aluminum, brass, polyethylene, SST, UHMW, Delrin

92 db(A)

106.3 db(A)

309915D

21

Image 21
Contents Model 309915DCarbon Monoxide Hazard Fire and Explosion HazardEquipment Misuse Hazard 309915DPressurized Equipment Hazard Burn HazardComponent Identification Component Identification Pressure Relief Procedure Removing & Installing Hopper SetupRemoving Hopper G Installing Hopper G PreparationCompressor Power Pack Removing Compressor Power Pack ZRunning Compressor Remotely Push compressor power pack Lift and turn motor lock knob Reinstalling Compressor Power Pack ZWetting Hose Wetting System End of Material Thickness Consistency Oughly mixed, gently set ballUse water-based materials Slowly add one bag of textureFuel Specifications Refueling Procedure Pressure Relief ProcedureFueling That you are not using when Plug installed in opening K orAlways have material outlet There is material in hopper. IfStarting Gas Engine StartupApplication Nozzle Orifice Nozzle No Air Volume Spray TechniquesNozzle Selection Adjustment If flow adjustment nut will not System AdjustmentSee Nozzle Selection, Turn, check to see if it isCompressor Power Pack Performance When you have finished spraying Shutdown and CleanupEnglish Relieve Pressure,Maintenance Technical Data Additional Warranty Coverage Warranty