Setup |
, |
ti3959a |
Reinstalling Compressor Power Pack (Z)
Note: For maximum performance | 1 Disconnect air hose from the | 2 Inspect cart and compressor | 3 Using handles, lift compressor |
use a 3/8 in. or 1/2 in. inside | compressor power pack quick | power pack (Z). Remove any | power pack (Z) onto cart |
diameter hose. | disconnect fitting (dd) and from | debris or dirt on side rails of | frame. |
| the cart air quick disconnect | cart and/or compressor power |
|
Hose must be rated for: | fitting (V). | pack. |
|
•200°F (93°C) maximum temperature
•125 psi or greater
|
| V |
|
| Q |
| tabs |
|
| S |
|
ti3782a |
|
|
4 Push compressor power pack | 5 Lift and turn motor lock knob | 6 Attach air line quick connect fitting (Q) to compressor air quick con- |
(Z) forward, until front edge | (S) until compressor power | nect inlet fitting (V). |
meets tabs on cart base. | pack (Z) is securely attached |
|
| to cart. |
|
309915D | 9 |