Delta 638517-00, SM300 warranty Additional Safety Rules for For Drill Presses

Page 3

ADDITIONAL SAFETY RULES FOR

FOR DRILL PRESSES

READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock, fire, and/or serious personal injury or property damage.

1.DO NOT OPERATE THIS TOOL UNTIL it is assembled and installed according to the instructions.

2.OBTAIN ADVICE from your supervisor, instructor, or another qualified person if you are not familiar with the operation of this tool.

3.FOLLOW ALL WIRING CODES and recommended electrical connections.

4.NEVER START THE MACHINE BEFORE CLEARING THE TABLE of all objects (tools, scrap pieces, etc.).

5.NEVER START THE MACHINE with the drill bit, cutting tool, or sander against the workpiece.

6.TIGHTEN ALL LOCK HANDLES before starting the machine.

7.USE ONLY DRILL BITS, CUTTING TOOLS, SANDING DRUMS, OR OTHER ACCESSORIES that have shanks of 1/2" in diameter or less.

8.USE ONLY DRILL BITS, CUTTING TOOLS, OR SANDING DRUMS that are not damaged.

9. PROPERLY LOCK DRILL BIT, CUTTING TOOL, OR SANDING DRUM IN THE CHUCK before

operating this machine.

10.USE RECOMMENDED SPEEDS for all operations.

11.AVOID AWKWARD OPERATIONS AND HAND POSITIONS where a sudden slip could cause a hand to move into the cutting tool.

12.KEEP ARMS, HANDS, AND FINGERS away from the cutting tool.

13.HOLD THE WORKPIECE FIRMLY AGAINST THE TABLE. Do not attempt to drill a workpiece that does not have a flat surface against the table. Prevent the

workpiece from rotating by clamping it to the table or by securing it against the drill press column.

14.TURN THE MACHINE “OFF” AND WAIT FOR THE DRILL BIT, CUTTING TOOL, OR SANDER TO STOP TURNING prior to cleaning the work area, removing debris, removing or securing workpiece, or changing the angle of the table. A moving drill bit, cutting tool, or sander can be dangerous.

15 PROPERLY SUPPORT LONG OR WIDE workpieces.

16.NEVER PERFORM LAYOUT, ASSEMBLY, or set-up work on the table/work area when the machine is running.

17TURN THE TOOL “OFF”, disconnect the tool from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs.

18.DISCONNECT THE TOOL from the power source, and clean the table/work area before leaving the tool. LOCK THE SWITCH IN THE “OFF” POSITION to prevent unauthorized use.

19.ADDITIONAL INFORMATION regarding the safe and proper operation of this tool is available from the Power Tool Institute, 1300 Summer Avenue, Cleveland, OH 44115-2851. Information is also available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201. Please also refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machines and the U.S. Department of Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

Wear appropriate hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Bench Drill Press General Safety Rules Additional Safety Rules for For Drill Presses Grounding Instructions Power ConnectionsPacking and Cleaning Extension CordsR E W O R D Assembly Tools Required Assembly Time EstimateDrill Press Parts Page Being Careful not to Overtighten Page Operating Controls and Adjustments Fastening Drill Press to Supporting SurfaceStarting and Stopping Drill Press Locking Switch OFF Position Table AdjustmentsFlexible Lamp Spindle Speeds Changing Speeds and Adjusting Belt TensionDrilling Holes to Depth Adjusting Spindle Return SpringOperation Installing and Removing Drill BitsDrilling Metal TroubleshootingCorrect Drilling Speeds Boring in WoodPage PARTS, Service or Warranty Assistance AccessoriesTaladradora de Banco de 254 mm Mantenga LOS Resguardos EN SU Sitio y en buen e s t a d o Normas DE Seguridad GeneralesReglas Adicionales DE Seguridad Para LAS Taladradoras Guarde Estas InstruccionesInstrucciones DE Conexión a Tierra Conexiones a LA Fuente DE AlimentaciónInstrucciones DE Funcionamiento Desempaquetado Y LimpiezaPrefacio Piezas DE LA Taladradora Ensamblaje Page Page DE Funcionamiento Controles Y Ajustes Afianzando LA Taladradora DE Banco LA Superficie DE ApoyoInterruptor Bloqueando EL Interruptor EN LA Posicion DE Apagado Lámpara FlexibleAjustes DE LA Mesa Cambio DE Velocidades Y Ajuste DEL Tensionamiento DE Correa Velocidades DE ArbolAjuste DEL Resorte DE Retorno DEL Arbol Perforacion DE Agujeros a ProfundidadFuncionamiento Instalacion Y Extraccion DE BrocasVelocidades QUE Perforan Correctas Page Perforacion DE Maderas Perforacion DE MetalesPIEZAS, Servicio O Asistencia DE Garantía Perceuse à colonne détabli de 25,4 cm 10 po modèle SM300 Règles Générales DE Sécurité Pour SA Propre SÉCURITÉ, Lire LE ModeConserver CES Directives Directives DE Mise À LA Terre Connexions ÉlectriquesRallonges Électriques AVA N T- P R O P O SDésemballage ET Nettoyage Pièces DE LA Perçeuse À Colonne Outils Nécessaires Pour L’ASSEMBLAGEDurée Estimée Pour L’ASSEMBLAGE Assembler la colonne A, à la base B AssemblageCalage D, Veuillez À NE PAS Trop Serrer Page Utilisation DES Commandes ET Réglages Fixation DE LA Perceuse Colonne À LA Surface DE SupportDémarrage ET Arrêt DE LA Perceuse À Colonne Verrouillage DE Linterrupteur EN Position D« Arrêt » Lampe FlexibleRéglages DE LA Table Débrancher LA Machine DE LA Source D’ALIMENTATION Vitesses DE BrocheDébrancher LA Machine DE LA Source D’ALIMENTATION Perçage DE Trous À Profondeur DéfinieInsertion ET Retrait DE Mèches FonctionnementPA N N a G E Vitesses Correctes DE Perçage Perçage DU BoisPerçage DU Métal Page Pièces Réparation OU Aide À Propos DE LA Garantie AccessoiresPORTER-CABLE · Delta Service Centers

638517-00, SM300 specifications

Delta 638517-00, SM300 is a cutting-edge model in the realm of advanced technological solutions, designed to meet the demanding needs of various industrial applications. This innovative device is lauded for its robust features, versatility, and efficiency, making it an ideal choice for professionals in multiple sectors including manufacturing, automation, and quality control.

One of the standout features of the Delta 638517-00, SM300 is its high-performance processing capability. Equipped with an advanced microprocessor, this model ensures fast data processing and real-time performance monitoring. This capability is crucial for industries that require quick decision-making and immediate feedback in their operations.

Another significant characteristic of the SM300 is its enhanced connectivity options. With support for various communication protocols, including Ethernet, USB, and serial connections, the SM300 can easily integrate into existing industrial networks. This flexibility allows for streamlined data transfer and communication, enabling seamless integration with other devices and systems, and thereby improving overall operational efficiency.

The Delta 638517-00, SM300 is also designed with user convenience in mind. It features an intuitive interface that simplifies the user experience, making it accessible for personnel with varying levels of technical expertise. The device comes with a comprehensive set of software tools that facilitate configuration, monitoring, and data analysis, allowing users to tailor the system to their specific operational needs.

Durability and reliability are key attributes of the SM300. Built to withstand harsh industrial environments, this model operates efficiently even in challenging conditions such as extreme temperatures, humidity, and dust. Its robust construction ensures minimal downtime and maintenance, thereby enhancing productivity.

Additionally, the SM300 employs advanced sensor technology. This allows for enhanced measurement accuracy and better data collection, which are critical for quality control and process optimization. The model supports various types of sensors, enabling users to customize their setup according to the specific requirements of their applications.

In conclusion, the Delta 638517-00, SM300 stands out as a powerful tool in industrial automation and control. With its powerful processing capabilities, versatile connectivity options, and user-friendly interface, it is designed to enhance operational efficiency and reliability in demanding environments. As industries continue to evolve, models like the SM300 will play a crucial role in driving technological advancement and operational success.
Top Page Image Contents