Ryobi P211 manuel dutilisation Specific Safety Rules, Battery Tool USE and Care, Service

Page 4

GENERAL SAFETY RULES

BATTERY TOOL USE AND CARE

Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

WARNING!

To reduce the risk of injury, user must read instruction manual.

When servicing a power tool, use only identical replace- ment parts. Follow instructions in the Maintenance sec- tion of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES

Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

Know your power tool. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this power tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Following this rule will reduce the risk of serious personal injury.

Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.

Protect your hearing. Wear hearing protectors during extended periods of operation. Following this rule will reduce the risk of serious personal injury.

Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.

Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.

Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.

Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.

Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock.

For best results, your battery tool should be charged in a location where the temperature is more than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store outside or in vehicles.

Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

4 — English

Image 4
Contents Save this Manual for Future Reference Accepts ALL one+ Battery Packs Batteries and chargers sold Separately Table of Contents IntroductionGeneral Safety Rules Work Area SafetyElectrical Safety Personal SafetyBattery Tool USE and Care Specific Safety RulesService Symbol Signal Meaning SymbolsName DESIGNATION/EXPLANATION Features Assembly OperationTo Install Battery Pack To Remove Battery PackSwitch Trigger Internal spindle lockSelecting Drive or Drill Setting Application Speed ModeTorque Adjustment Magnetic bit holderUsing the Auxiliary Handle Assembly Adjusting the Auxiliary Handle AssemblyAdjusting the Depth Stop ROD Installing BitsMetal DRILLING Wood DRILLINGMasonry Drilling Maintenance General MaintenanceBattery Pack Preparation for Recycling To Retighten a Loose ChuckGarantie Table DES MatièresRègles DE Sécurité Générales Utilisation ET Entretien DE LA Batterie Règles DE Sécurité ParticulièresDépannage Symbole Signal Signification SymbolesSymbole NOM Désignation / Explication Caractéristiques Assemblage UtilisationDéballage Liste DE Contrôle D’EXPÉDITIONInstallation DU BLOCs-piles  Caractéristiques Relatives À LA Protection DES PilesGâchette Verrouillage de broche interneSélection DU Mode Application Vitesse ModeRéglage DU Couple Rangement DE ForetInstallation / Retrait DU Porte Embout Magnétique Installation DES ForetsUtilisation DE LA Poignée Auxiliaire Réglage DE LA Poignée AuxiliairePerçage Perçage DU BoisPerçage DU Métal Perçage DE Pièces DE MaçonnerieEntretien Entretien GénéralPour LE Recyclage AVERTISSEMENT  Serrage D’UN Mandrin DesserréIntroducción Índice DE ContenidoGarantía Reglas DE Seguridad Generales Guarde estas instrucciones Seguridad en el área de trabajoSeguridad Eléctrica Seguridad PersonalEmpleo Y Cuidado DE LA Herramienta DE Baterías Reglas DE Seguridad EspecíficasServicio Símbolos PeligroAdvertencia PrecauciónCaracterísticas Armado FuncionamientoDesempaquetado Lista DE EmpaquetadoCaracterísticas DE Protección DE LAS Baterías Selector DE Sentidode RotaciónSelección DE Ajuste DE Taladrado O Atornillado OperaciónModo VelocidadAjuste LA Fuerza DE Torsión Compartimiento Para PuntasEmpleo DEL Conjunto DEL Mango Auxiliar Ajuste DEL Conjunto DEL Mango AuxiliarInstalación DE LAS Puntas DE Destornillador Remoción DE LAS BrocasTaladrado Taladrado EN MaderaMantenimiento Taladrado EN Obras DE AlbañileríaMantenimiento General Almacenamiento de las herramientasPara Apretar EL Portabrocas Cuando SE Afloje Desmontaje del portabrocasVea las figuras 16 a 18, página Keyless chuck mandrin sans clé Ab c Right Correct Forma correctaPage OPERATOR’S Manual / 18 volt hammer drill ONE World TECHNOLOGIES, INC
Related manuals
Manual 22 pages 37 Kb