Ryobi P211 manuel dutilisation Symbols, Name DESIGNATION/EXPLANATION, Symbol Signal Meaning

Page 5

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

 

 

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

 

in death or serious injury.

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

 

in death or serious injury.

 

 

 

 

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in

 

minor or moderate injury.

 

 

 

 

 

 

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in property

 

damage.

 

 

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

 

Safety Alert

Indicates a potential personal injury hazard.

V

Volts

Voltage

 

min

Minutes

Time

 

 

Direct Current

Type or a characteristic of current

no

No Load Speed

Rotational speed, at no load

.../min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

 

Wet Conditions Alert

Do not expose to rain or use in damp locations.

 

Read The Operator’s Manual

To reduce the risk of injury, user must read and understand operator’s

 

manual before using this product.

 

 

 

Eye Protection

Always wear safety goggles or safety glasses with side shields and,

 

as necessary, a full face shield when operating this product.

 

 

 

 

This product uses nickel-­cadmium (Ni-Cd) and lithium-ion

 

Recycle Symbols

(Li-ion) batteries. Local, state, or federal laws may prohibit disposal

Li - Ion

of batteries in ordinary trash. Consult your local waste authority

 

 

for information regarding­

available recycling and/or disposal

 

 

options.

 

5 — English

Image 5
Contents Batteries and chargers sold Separately Accepts ALL one+ Battery PacksSave this Manual for Future Reference Introduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesBattery Tool USE and Care Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Features Operation AssemblyTo Remove Battery Pack To Install Battery PackSwitch Trigger Internal spindle lockApplication Speed Mode Selecting Drive or Drill SettingTorque Adjustment Magnetic bit holderAdjusting the Auxiliary Handle Assembly Using the Auxiliary Handle AssemblyAdjusting the Depth Stop ROD Installing BitsMasonry Drilling Wood DRILLINGMetal DRILLING General Maintenance MaintenanceBattery Pack Preparation for Recycling To Retighten a Loose ChuckTable DES Matières GarantieRègles DE Sécurité Générales Dépannage Règles DE Sécurité ParticulièresUtilisation ET Entretien DE LA Batterie Symbole NOM Désignation / Explication SymbolesSymbole Signal Signification Caractéristiques Utilisation AssemblageDéballage Liste DE Contrôle D’EXPÉDITIONCaractéristiques Relatives À LA Protection DES Piles Installation DU BLOCs-piles Gâchette Verrouillage de broche interneApplication Vitesse Mode Sélection DU ModeRéglage DU Couple Rangement DE ForetInstallation DES Forets Installation / Retrait DU Porte Embout MagnétiqueUtilisation DE LA Poignée Auxiliaire Réglage DE LA Poignée AuxiliairePerçage DU Bois PerçagePerçage DU Métal Perçage DE Pièces DE MaçonnerieEntretien Général EntretienPour LE Recyclage AVERTISSEMENT  Serrage D’UN Mandrin DesserréGarantía Índice DE ContenidoIntroducción Guarde estas instrucciones Seguridad en el área de trabajo Reglas DE Seguridad GeneralesSeguridad Eléctrica Seguridad PersonalServicio Reglas DE Seguridad EspecíficasEmpleo Y Cuidado DE LA Herramienta DE Baterías Peligro SímbolosAdvertencia PrecauciónCaracterísticas Funcionamiento ArmadoDesempaquetado Lista DE EmpaquetadoSelector DE Sentidode Rotación Características DE Protección DE LAS BateríasOperación Selección DE Ajuste DE Taladrado O AtornilladoModo VelocidadCompartimiento Para Puntas Ajuste LA Fuerza DE TorsiónEmpleo DEL Conjunto DEL Mango Auxiliar Ajuste DEL Conjunto DEL Mango AuxiliarRemoción DE LAS Brocas Instalación DE LAS Puntas DE DestornilladorTaladrado Taladrado EN MaderaTaladrado EN Obras DE Albañilería MantenimientoMantenimiento General Almacenamiento de las herramientasVea las figuras 16 a 18, página Desmontaje del portabrocasPara Apretar EL Portabrocas Cuando SE Afloje Keyless chuck mandrin sans clé Ab c Correct Forma correcta RightPage ONE World TECHNOLOGIES, INC OPERATOR’S Manual / 18 volt hammer drill
Related manuals
Manual 22 pages 37 Kb

P211 specifications

The Ryobi P211 is a versatile and powerful tool that stands out in the market of cordless drills. As part of Ryobi’s ONE+ system, this tool operates on an 18V battery platform, making it compatible with other Ryobi tools. This feature alone provides convenience and flexibility for users who want to minimize battery inventories.

One of the standout features of the P211 is its 1/2 inch single sleeve keyless chuck, which provides easy and quick bit changes. This functionality is especially useful for busy professionals and DIY enthusiasts who often switch between various tasks. Additionally, the drill boasts an impressive two-speed transmission, allowing users to select between 0-450 RPM for low speed and 0-1,600 RPM for high speed. This dual-speed capability is essential for tackling different materials and applications, from delicate tasks requiring precision to heavier projects demanding speed and torque.

Equipped with a powerful motor, the Ryobi P211 delivers a maximum torque of 350 in-lbs, enabling users to drive screws and drill into various materials such as wood, metal, and plastic with ease. The 24-position clutch adds further control to the tool, allowing users to adjust the torque setting based on the specifics of the job, thus preventing overdriving and damage to the materials being worked on.

User comfort is also a priority in the design of the Ryobi P211. The drill features a rubberized grip that not only provides a secure hold but also minimizes vibrations, making extended use more comfortable. Furthermore, the built-in LED work light illuminates dark workspaces, providing visibility in tight or dimly lit areas, which is crucial for precision work.

In terms of construction, the Ryobi P211 is built with durability in mind. Its rugged design ensures it withstands the rigors of daily use, appealing to both professionals and DIYers alike. The combination of features, power, and comfort makes the Ryobi P211 a reliable choice for a wide range of tasks, whether drilling pilot holes, driving screws, or working on home improvement projects. Overall, this tool embodies Ryobi's commitment to innovation and practicality, making it a valuable addition to any toolbox.