NOTE
NOTE
Screens
HSCSD screen
4. Master timeslot
Type | integer |
|
|
Units | none (timeslot) |
|
|
Limits | 2 thru 5 |
|
|
Default | 4 |
|
|
The Master timeslot field indicates which timeslot is used for the master TCH. As the slave TCH is always in the timeslot immediately after the master, changing this field sets the slave timeslot to the value “master timeslot plus one”.
On a master unit or a single unit, the value of this field is always the same as the TCH timeslot field on the Cell Status screen.
The default is reset when the instrument type (see page 24) is selected.
5. Slave timeslot
Type | |
|
|
Values | 3 thru 6 |
|
|
Default | 5 |
|
|
The relative position of the slave timeslot is fixed at +1. Therefore, if the master timeslot is set to 3, the slave timeslot is set to 4. Likewise, as the master timeslot changes, this field also changes.
On a slave unit, the value of this field is always the same as the TCH timeslot field on the Cell Status screen.
The default is reset when the instrument type (see page 24) is selected.
30 | Chapter 4 |