FEIN Power Tools FMM250Q manual Hand/arm vibrations

Page 6

3 41 01 091 21 0.book Seite 6 Montag, 29. Juni 2009 8:32 08

6

 

en

 

 

– Avoid overheating the material being

– Observe the material manufacturer’s work-

 

sanded and the power tool.

ing instructions.

–Empty the dust collector/container in time. Observe the relevant regulations in your country for the materials being worked.

Hand/arm vibrations

WARNING While working with this power tool, hand/arm vibrations

occur. These can lead to health impairments.

WARNING The vibration emission value during actual use of the power

tool can differ from the declared value depend- ing on the ways in which the tool is used.

WARNING It is necessary to identify safety measures to protect the

operator that are based on an estimation of exposure in the actual conditions of use.

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a pre- liminary assessment of exposure.

The declared vibration emission level repre- sents the main applications of the tool. How- ever if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may sig- nificantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibra- tion should also take into account the times when the tool is switched off or when it is run- ning but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)

Sound emission

Measured A-weighted sound power level LwA (re 1 pW), in decibels: 85

Measuring uncertainty KwA, in decibels: 3 A-weighted emission pressure power level measured at the workplace LpA (re 20 µPa), in decibels: 74

Measuring uncertainty KpA, in decibels: 3

REMARK: The sum of the measured emission value and respective measuring inaccuracy represents the upper limit of the values that can occur during measuring.

Wear ear protection!

Measured values determined in accordance with the corresponding product standard.

Vibrations

 

 

 

Classification of FEIN

Weighted

application tools accord-

acceleration*

ing to vibration class

 

 

 

VC0

< 2.5 m/s2

 

< 8 ft/s2

VC1

< 5 m/s2

 

< 16 ft/s2

VC2

< 7 m/s2

 

< 23 ft/s2

VC3

< 10 m/s2

 

< 33 ft/s2

VC4

< 15 m/s2

 

< 50 ft/s2

VC5

> 15 m/s2

 

> 50 ft/s2

*These values are based on a work cycle con- sisting of no-load and full-load operation of the same duration.

For information on the vibration class assigned to the application tool, please see the enclosed data sheet 3 41 30 335 06 0.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Multimaster Français Mode demploi Español Instrucciones de uso Work area safety For your safetyGeneral Safety Rules Personal safetySpecial safety instructions Power tool use and careHandling hazardous dusts Hand/arm vibrations Extension cord Intended use of the power toolOperation of the power tool off power generators 100 150 120Symbols Character Tional system of units SITechnical description and specifications Accidental starting of the power toolMultimaster FMM250Q Assembly instructions Mounting the suction device FigureChanging the tool Fastening element Tool holder Quick-clamping Lever180Multimaster FMM250 Figure Tool holder Allen key Sanding sheet Sanding padSetting the oscillating frequency Figure Connecting the dust extraction , ➐Switching on and OFF Figure Working instructionsStorage Multimaster FMM250Q Figure SandingSawing ScrapingWarranty and liability MaintenanceAccessories Provided AccessoriesSécurité relative au système électrique Pour votre sécuritéPlace de travail Sécurité des personnes18 fr Utilisation et emploi soigneux de l’outil élec- troportatifInstructions particulières de sécurité ’amiante et les matériaux contenant de l’amiante Maniement de poussières nocivesVibrations mains-bras Veillez à bien aérer la zone de travailMesurée VibrationAccélération réelle De vibrationsConception de l’outil électrique Câble de rallongeNe faire fonctionner l’outil électrique Ou la mort SymbolesAu Canada Peut entraîner de graves blessures ou la mortUnités de base et unités dérivées du système internatio Nal SIDescription technique et spécification Interrupteur Marche/Arrêt Levier de serrage rapideDispositif d’aspiration Butée de profondeur Type Indications de montage Montage du dispositiration FigureDispositif d’aspiration Changement d’outil Serrage rapideTravaux de montage ou Feuille abrasiveRéglage de la fréquence d’oscillation Figure Indications pour le travailRaccordement de l’aspiration de poussières , ➐ Bloquer la pièce à travaillerEntretien Accessoires GarantiePara su seguridad Instrucciones generales de seguridadNo utilice esta herramienta eléctrica sin Seguridad de personas ServicioInstrucciones de seguridad especiales Tratamiento de materiales en polvo peligrosos Vibraciones en la mano/brazoInflamarse o provocar una explosión Aceleración ¡Utilizar unos protectores auditivosVibración PonderadaUtilización reglamentaria de la herramienta eléctrica Cables de prolongaciónSimbología Profundidad Internacional de unidades SIDescripción técnica y especificaciones Sentarse en caso de una puesta en marcha involuntariaDispositivo de Aspiración Tope de profundidad Instrucciones de montaje Montaje del dispositivo para aspiración FiguraPre unos guantes de protección. Existe el Cambio de herramientaMultimaster FMM250Q Figura Fijación rápidaMultimaster FMM250 Fig Conexión y desconexión Figura Instrucciones para la operaciónConexión del equipo de aspiración de polvo Figura 2, ➐ Ajuste de la frecuencia de oscilación. FiguraMantenimiento Garantía Accesorios que se adjuntanAccesorios especiales Protección del medio ambiente, eliminación

FMM250, FMM250Q specifications

FEIN Power Tools has long been recognized for its dedication to innovation and quality in the power tool industry. The FEIN FMM250Q and FMM250 are exemplary models that showcase this commitment through their design, features, and technological advancements.

The FMM250Q and FMM250 are part of FEIN's renowned MultiMaster series, which is widely acclaimed for its versatility in handling a variety of applications. These oscillating tools are engineered for precision and power, enabling users to accomplish tasks ranging from sanding and grinding to cutting and scraping with ease. Both models are equipped with a robust 250-watt motor that provides the necessary torque and speed to tackle challenging jobs efficiently.

One of the standout features of the FMM250Q and FMM250 is the innovative Starlock tool holder system. This advanced system allows for quick and tool-free attachment of accessories, ensuring optimal power transfer for maximum efficiency. The tool’s compatibility with a wide range of FEIN and other third-party accessories further enhances its versatility, making it suitable for diverse materials such as wood, metal, and plastic.

Moreover, both models boast a variable speed controller, enabling users to adjust the oscillation speed according to the specific requirements of the task at hand. This feature is particularly useful for working on delicate surfaces or for intricate tasks that require a higher level of precision. The tool's oscillation angle of oscillation is designed to provide an effective working range, allowing for efficient material removal while minimizing wear on the tool and the material being worked on.

Comfort and ergonomics are also central to the design of the FMM250Q and FMM250. The tools feature a compact, lightweight design that reduces fatigue during prolonged use. The soft-grip handle provides additional comfort and control, ensuring users can work safely and effectively in various positions.

In summary, the FEIN FMM250Q and FMM250 power tools embody the brand's commitment to quality, innovation, and user-friendly design. With the powerful motor, efficient Starlock system, variable speed functionality, and ergonomic construction, these oscillating tools are essential additions to the toolkit of any professional or DIY enthusiast. Whether tackling renovations, repairs, or intricate detailing, the FMM250Q and FMM250 deliver exceptional performance and reliability.
Top Page Image Contents