Elation Professional 575H manual Mounting and Installation

Page 16

Design Par 575H™

7. MOUNTING AND INSTALLATION

Cautions:

For added protection mount the fixtures in areas outside walking paths, seating areas, or in areas were the fixture might be reached by unauthorized personal.

Before mounting the fixture to any surface, make sure that the installation area can hold a minimum point load of 10 times the device’s weight.

Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing the fixture.

Before taking into operation for the first time, the installation has to be approved by an expert.

When installing the device, make sure there is no highly inflammable material within a distance of min. 0,5m

Mounting

The DESIGN PAR 575H™ is fully operational in two different mounting positions, hanging upside-down from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.

Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE0711-217 for proper installation in Europe To ensure proper installation, only qualified staff should attempt installation.

©Elation Professional®

16

Design Par 575H™

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Design Par 575H Contents General Information Never open this fixture while in use Design Par 575H Safety Instructions Design Par 575H Features General Guidelines Fixture Overview Design Par 575H Design Par 575H Lamp Installation Instructions Installing or replacing the lampLamp Optimization Design Par 575H Mounting and Installation MountingMounting points Clamp Mounting Securing the Design PAR 575H Understanding DMX DMX-512 control connection DMX-512 connection with DMX terminatorFixture DMX addressing Design Par 575H Display LED Indicators Default settings shaded Fixture MenuLamp OFF Setting/Changing the DMX Address Main Menu FunctionsAddress Menu Test MenuAudi Play Menu RUNAuto Rese Reset Menu Lamp MenuALL ScanTime Menu LifeLamp ClmpRtlt Menu Rpan MenuFine Menu MIC Menu Degr MenuDisplay Menu Laau Automatic lamp start with power Laau Fixture SettingsRdmx Dlof Controller SettingsDlay Spot Reload the original factory settingsDfse Fans FeedVER Adju Edit MenuREC StepSC01 RUN Design Par 575H DMX Channel Traits DMX channel function and values Error Codes Design Par 575H Cleaning and Maintenance Disconnect from mains before starting maintenance operationYear Limited Warranty Design Par 575H Photometric Data Dimensional Drawings Circuit Schematic Technical Specifications Power supply Power consumptionDesign Par 575H Elation Professional Design Par 575H Elation Professional Elation Professional
Top Page Image Contents