Design Par 575H™
6. LAMP INSTALLATION INSTRUCTIONS
Installing or replacing the lamp
Only install the lamp with the device unplugged from the mains.
The lamp has to be replaced when it is damaged or deformed.
Before replacing the lamp be sure the unit has ample time to cool, to avoid injury to yourself never touch the lamp when it is hot.
During the installation of halogen lamps do not touch the glass portion of the bulb bare handed. Always use a cloth to handle the lamps during insertion and removal.
Do not install lamps with a higher wattage than that specified by the manufacture, they generate higher temperatures than which the device is designed to cool and may explode.
Installation Procedure:
1.Set the fixture on its’ base and remove the large retaining thumb screw.
2.Gently pull out the lamp/socket assembly to access the lamp.
3.Gently remove the old lamp by grasping it by the ceramic base.
©Elation Professional® | 13 | Design Par 575H™ |