Elation Professional 575H manual Laau Automatic lamp start with power

Page 33

Design Par 575H™

VALU – This function will display the DMX value of each channel as it is adjusted through the use of a DMX console.

1.Access the main menu.

2.Tap the UP button until “DISP” is displayed.

3.Press ENTER, the display will show “VALU”.

4.Press ENTER, once again “d-00” will be displayed.

5.Press ENTER to confirm.

6.Press MODE/ESC to return to the main menu.

D ON – This function will turn the display off after the has gone two seconds without any menu activity.

1.Access the main menu.

2.Tap the UP button until “DISP” is displayed.

3.Press ENTER, the display will show “VALU”.

4.Tap the UP button until ”D-ON” is displayed and tap the ENTER button.

5.Press the UP button to select “ON” to activate this function, or “OFF” to deactivate this function.

6.Press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

FLIP – This function will reverse the display readout buy 180˚.

1.Access the main menu.

2.Tap the UP button until “DISP” is displayed.

3.Press ENTER, the display will show “VALU”.

4.Tap the UP button until ”FLIP” is displayed and tap the ENTER button.

5.Press the UP button to select “ON” to activate this function, or “OFF” to deactivate this function.

6.Press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

13.SPEC MENU – This menu option access all the special functions listed below.

LAAU - Automatic lamp start with power.

©Elation Professional®

33

Design Par 575H™

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Design Par 575H Contents General Information Never open this fixture while in use Design Par 575H Safety Instructions Design Par 575H Features General Guidelines Fixture Overview Design Par 575H Design Par 575H Installing or replacing the lamp Lamp Installation InstructionsLamp Optimization Design Par 575H Mounting Mounting and InstallationMounting points Clamp Mounting Securing the Design PAR 575H Understanding DMX DMX-512 connection with DMX terminator DMX-512 control connectionFixture DMX addressing Design Par 575H Display LED Indicators Fixture Menu Default settings shadedLamp OFF Main Menu Functions Setting/Changing the DMX AddressAddress Menu Test MenuPlay Menu RUN AudiAuto Lamp Menu Rese Reset MenuALL ScanLife Time MenuLamp ClmpRpan Menu Rtlt MenuFine Menu Degr Menu MIC MenuDisplay Menu Laau Automatic lamp start with power Fixture Settings LaauRdmx Controller Settings DlofDlay Reload the original factory settings SpotDfse Feed FansVER Edit Menu AdjuStep RECSC01 RUN Design Par 575H DMX Channel Traits DMX channel function and values Error Codes Design Par 575H Disconnect from mains before starting maintenance operation Cleaning and MaintenanceYear Limited Warranty Design Par 575H Photometric Data Dimensional Drawings Circuit Schematic Power supply Power consumption Technical SpecificationsDesign Par 575H Elation Professional Design Par 575H Elation Professional Elation Professional
Top Page Image Contents