Elation Professional 575H manual Laau, Rdmx, Fixture Settings

Page 34

Design Par 575H™

RDMX - Allows DMX address to be changed via and external DMX controller. DLOF - Switch lamp off via DMX controller.

DLAY - Lamp-on delay time.

SPOT - This provides a spot beam for better lamp optimization. DFSE (Default) - Resets the unit to all default settings.

FEED - This function turn the DMX correction feature “ON” (default) or “OFF.” FANS- Changes the functionality of the built-in fans.

VER (Version) - Displays the software version.

ADJU – Calibration functions

LAAU

– This function controls the automatic lamp start feature. By default the unit will automatically ignite the lamp when unit is turned on. Use this function to turn this feature on and off.

1.Access the main menu.

2.Tap the UP button until “SPEC” is displayed, press ENTER.

3.Tap the UP button until “LAAU” is displayed, press ENTER.

4.The display will show “ON/OFF.”

5. Press the buttonUP to display “ON” to or activate“OFF” thisto

deactivate this function.

6.Press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

RDMX

– This function allows the DMX address to remotely be adjusted from a DMX console. This setting requires special settings for both the controller and the fixture. RDMX is on by default. Follow the procedure listed below to access the RDMX functions:

Fixture Settings:

1.Access the main menu.

2.Tap the UP button until “SPEC” is displayed, press ENTER.

3.Tap the UP button until “RDMX” is displayed, press ENTER.

©Elation Professional®

34

Design Par 575H™

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Design Par 575H Contents General Information Never open this fixture while in use Design Par 575H Safety Instructions Design Par 575H Features General Guidelines Fixture Overview Design Par 575H Design Par 575H Lamp Installation Instructions Installing or replacing the lampLamp Optimization Design Par 575H Mounting and Installation MountingMounting points Clamp Mounting Securing the Design PAR 575H Understanding DMX DMX-512 control connection DMX-512 connection with DMX terminatorFixture DMX addressing Design Par 575H Display LED Indicators Default settings shaded Fixture MenuLamp OFF Address Menu Setting/Changing the DMX AddressMain Menu Functions Test MenuAudi Play Menu RUNAuto ALL Rese Reset MenuLamp Menu ScanLamp Time MenuLife ClmpRtlt Menu Rpan MenuFine Menu MIC Menu Degr MenuDisplay Menu Laau Automatic lamp start with power Laau Fixture SettingsRdmx Dlof Controller SettingsDlay Spot Reload the original factory settingsDfse Fans FeedVER Adju Edit MenuREC StepSC01 RUN Design Par 575H DMX Channel Traits DMX channel function and values Error Codes Design Par 575H Cleaning and Maintenance Disconnect from mains before starting maintenance operationYear Limited Warranty Design Par 575H Photometric Data Dimensional Drawings Circuit Schematic Technical Specifications Power supply Power consumptionDesign Par 575H Elation Professional Design Par 575H Elation Professional Elation Professional
Top Page Image Contents