Rec, Step | Elation Professional 575H guide

Design Par 575H™

STXX (SC01 – SC48) - These are the scenes that are stored in your program. There are a total of 48 scenes. C-01 - C-11 (Channel 1 - Channel 11) – Represents the total fixture channels for each scene that can be edited.

TIME (Time) - Running time of the entire program. CEDT - Edit program using a external controller. REC – Auto save function.

RUN – Program test mode.

REC

-Records scenes automatically from any external DMX controller and stores them inside the fixtures built-in memory. These scenes can then be recalled without the use of an external controller.

1. Access the main menu.

2. Tap the UP or DOWN buttons until “EDIT” is displayed, then press ENTER.

3. Tap the UP or DOWN buttons until “REC” is displayed, then press ENTER.

4. After entering the REC function the display will read “RE.XX,” where as “XX” represents the scene number in the internal memory to which the scene will be stored.

5. Press the UP or DOWN buttons to select the desired scene number.

6. When you reach the scene number you wish to store the scene to, press ENTER to confirm and lock the scene into the fixture’s memory.

7. Press MODE/ESC to return to the main menu.

STEP

- With this function you can program the number of steps in your individual Program.

1.Access the main menu.

2.Tap the UP button until “EDIT” is displayed, press ENTER.

3.Tap the UP button until “STEP” is displayed, press ENTER.

4.The display shows “S-01,” this indicates the first step of your program. You can call up to 48 scenes in “Run.” For example; if “S-05” is displayed, it means that the scene will “RUN” the first 5 scenes you saved in “Edit.”

Design Par 575H™