Kompernass PEH 900 manual Operating Instructions, Planing Surfaces, Chamfering Corners, Rebating

Page 10

OPERATING INSTRUCTIONS

Always switch on the planer before making contact with the material and then guide the planer on to the workpiece

PLANING SURFACES

Place the planer with the front of the base plate

on the workpiece.

 

Always make sure when you are planing surfaces such as beams and boards that the base plate

is in full contact with the surface to avoid

the danger of blade kickback.

 

 

Always use both hands to guide the plane over the workpiece with even forward pressure.

 

CHAMFERING CORNERS

The vee groove

in the centre of the front of the base plate

allows you to chamfer the corners of your workpiece very quickly and easily.

Place the planer on to the workpiece with the vee groove

on the corner and then guide the planer along the corner.

Make sure you keep the angle at 45° and an even forward pressure.

REBATING

Example set up: for right hand rebates the side fence

goes on the left and the rebating depth stop

goes on the right into the holes on

the planer (with the planer viewed from above).

 

 

 

Set the rebating depth up to a max. 24 mm using the rebating depth stop . Set the side fence

to give the required width. Adjust the pla

ning depth scale

to the maximum of 3.5 mm. Go over the workpiece as many times as is required to obtain the desired rebate.

CHANGING OR REVERSING THE PLANER BLADES

WARNING: Before doing any work on the planer always pull out the plug from the mains.

IMPORTANT ADVICE: Do not unscrew the two hexagonal socket headed screws. They adjust the height of the cutting block. Adjustment is only required if you wish to change to another planer blade type e.g. a profiled blade.

HSS reversible blades are fitted as standard at the works. When you change blades, always change both blades to avoid any imbalance. When they become blunt, the PARKSIDE reversible blades can be changed without any height adjustment of the cutting block being necessary

1)

First unscrew one cutting block

only so that you can use the works-mounted second cutting block as an aid to setting up later.

2)

Unscrew the three screws in the cutting block

using the supplied open spanner.

3)Take the cutting block out of the planing roller.

4)Slide the planer blade sideways out of the cutting block.

NOTE: The cutting block can also be dismantled, e.g. for cleaning.

5)Re-assembly with a reversed or new blade is done in reverse order.

6)Check again for safety:

-the position of the planer blade in the cutting block

-the balanced and secure seating of the cutting block and the 3 fixing screws

-that the height adjustment is correct (2 hexagonal socket headed screws).

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PEH 2002 Käyttöohjeet Användaranvisning Page Technische Daten Elektro Hobel PEHAusstattung PEH Wichtige SicherheitshinweiseHobeltiefe Einstellen InbetriebnahmeEIN- UND Ausschalter Spanauswurf UND -ABSAUGUNGKanten Anfasen ArbeitshinweiseFlächen Hobeln FalzenTipps UND Tricks Zahnriemen WechselnWartung UND Pflege KonformitätserklärungImportant Safety Advice PEH 900 Power PlanerFeatures Technical InformationSetting the Planing Depth On / OFF SwitchOperation Chamfering Corners Operating InstructionsPlaning Surfaces RebatingTips and Tricks Maintenance and CareChange Toothed Belt Statement of ConformityCaractéristiques Rabot Électrique PEHÉquipement PEH Consignes DE Sécurité ImportantesGâchette Mise EN ServiceRéglage DE L’ÉPAISSEUR DE Copeaux Rabotage DE Surfaces Remplacement OU Inversion DES LamesConsignes DE Travail Biseautage D’ARÊTESRecommandations ET Conseils Remplacement DE LA CourroieMaintenance ET Entretien Certificat DE ConformiteDati Tecnici Piallatrice Elettrica PEHEquipaggiamento PEH Importanti Avvertenze DI SicurezzaImpostazione Profonditá DI Piallatura EsercizioUscita Trucioli ED Aspirazione Smussare Bordi Annotazioni PER IL LavoroPiallare Superfici AggraffareConsigli Pratici Sostituzione Cinghia DentataManutenzione E Cura Dichiarazione DI ConformitàDatos Técnicos Cepilladora Eléctrica PEHCepilladora Eléctrica PEH Advertencias DE Seguridad ImportantesAjustar Profundidad DE Cepillado Puesta EN MarchaCONECTOR/DESCONECTAR Descarga DE Virutas Y Aspiración DE VirutasBiselar Advertencias DE TrabajoCepillar Superficies RanurarSugerencias Y Trucos Cambiar LA Correa DentadaMantenimiento Y Cuidados Declaracion DE ConformidadDados Técnicos Plaina Eléctrica PEHEquipamento PEH Instruções Importantes DE SegurançaAjuste DA Profundidade DE Aplainamento Colocação EM FuncionamentoInterruptor LIGADO/DESLIGADO Expulsão E Aspiração DE AparasChanfragem DE Arestas Instruções DE TrabalhoAplainamento DE Superfícies RebaixosConselhos E Truques Substituição DA Correia DentadaManutenção E Cuidados Declaração DE ConformidadeTechnische Gegevens Elektrische Schaaf PEHUitvoering PEH Belangrijke VeiligheidsinstructiesSchaafdiepte Instellen IngebruiknameAAN- EN Uitschakelaar Spaanderuitworp EN -AFZUIGINGKanten Afschuinen WerkinstructiesOppervlakken Schaven RabattenHandige Tips Tandriem VervangenOnderhoud EN Reiniging ConformiteitsverklaringÂÁÎÔ‹ £∂∏ ∂ §∂π∆√Àƒπ∞ ¶√¢∂π∂π ∂ƒ∞π∞ ∞¡∆π∞∆∞∆∞∏ √¢√¡∆ø∆√À πª∞¡∆∞ WYPOSA˚ENIE PEH Uruchomienie Wymiana LUB Odwracanie NO˚Y Wymiana Pasa NAP¢DOWEGO Tekniset Tiedot Sähköhöylä PEHVarusteet PEH Tärkeitä TurvaohjeitaHöyläyssyvyyden Säätäminen KäyttöönottoPÄÄLLE- JA POIS-KATKAISIJA Lastun Heitto JA -IMUKulmien Viistoaminen TyöohjeitaPintojen Höyläys UurtaminenVinkkejä JA Apukeinoja Hammashihnan VaihtaminenHuolto JA Hoito KonformiteettiselvitysPÅ /AV Elhyvel PEHUtrustning PEH Tekniska DataHyvlingsdjup Första AnvändningPÅ/ AV Spånutkast OCH UtsugFasa Kanter ArbetsanvisningarHyvla Ytor FalsaTips OCH Trick KUGGREM, BytaUnderhåll OCH Vård KonformitetsdeklarationGarantie WarrantyBacata COYFER-SAITT, S.A GaranziaGarantía Garantia∂À∏∏ Takuu Garanti

PEH 900 specifications

The Kompernass PEH 900 is a versatile hand-held vacuum cleaner designed specifically for the demands of modern households. Compact and lightweight, it stands out as an ideal cleaning solution for those hard-to-reach areas in your home, office, or car. This efficient device combines innovation with functionality, ensuring that users can enjoy a thorough clean without the burden of bulky equipment.

One of the primary features of the PEH 900 is its powerful suction capability, which is enabled by a robust motor that offers impressive performance for a handheld unit. Its design allows for easy maneuverability, making it easy to navigate around furniture and tight corners. The vacuum is equipped with a range of attachments that cater to different cleaning tasks, enhancing its versatility. These attachments include crevice tools for narrow spaces, brush heads for dusting surfaces, and upholstery nozzles which make cleaning fabrics a breeze.

The PEH 900 incorporates advanced filtration technology, including a HEPA filter that captures fine particles, allergens, and dust. This is particularly beneficial for allergy sufferers and anyone who desires a cleaner indoor environment. The filter is washable, promoting sustainability and ensuring that maintenance is both simple and economical.

A standout characteristic of the Kompernass PEH 900 is its ergonomic design. The vacuum is lightweight, and its handle is designed to provide a comfortable grip, allowing users to clean for extended periods without fatigue. The compact nature of the device makes it easy to store when not in use, contributing to an organized living space.

Additionally, the vacuum features easy-to-empty dust containers that minimize mess. The user-friendly design ensures that debris can be disposed of quickly and hygienically without coming into contact with dust particles.

In terms of power supply, the PEH 900 typically operates on a rechargeable battery, providing the freedom to clean without being tethered by a power cord. This cordless functionality makes it particularly suitable for outdoor cleaning tasks as well.

Overall, the Kompernass PEH 900 is a practical and efficient tool for maintaining cleanliness in any environment. With its combination of powerful performance, versatile attachments, advanced filtration, and user-centric design, it caters to the needs of a wide range of users, making it an essential addition to modern cleaning arsenals.
Top Page Image Contents