Husqvarna DXR-310 manual Changing tools, Cleaning, Fitting, Storage

Page 31

TOOLS

Changing tools

IMPORTANT!

Changing tools may mean that the operator has to be within the machine’s risk area. Ensure that nobody unintentionally starts the machine while the tool is being changed. Keep a sharp watch on the machine and be prepared to turn it off. Guard hands and feet against crushing.

Cleaning

Prevent dirt from entering the hydraulic system by:

•Wiping dirt off the couplings before assembling or dismantling.

•Placing dust guards on the machine’s hydraulic couplings when no tool is mounted.

•Ensuring that the tool’s hoses are always con- nected together when the tool is not connected to the machine.

Fitting

IMPORTANT!

Ensure that the tool is correctly and securely Þtted. If a tool unexpectedly comes loose it can cause personal injury.

•Ensure that the machine is situated on a stable surface with the outriggers down.

•Position the tool with the holder facing the machine at a suitable distance, not too close to the ma- chine.

•Ensure that the tool is turned the right way round. The tool’s pressure connection must be connected to the main valve’s B-port and the return hose to the main valve’s A-port.

•Direct the tool holder so that it grips the tool. Tighten the tool by raising the arm system and manoeuvring cylinder 4 in.

•Shut off the machine.

•Insert the wedge so that the holes for the locking pin Þt.

•Insert the locking pin.

•Connect the hydraulic hoses and any hoses for hammer lubrication (when Þtting the hammer). The tool’s pressure connection must be connected to the main valve’s B-port and the return hose to the main valve’s A-port.

The hydraulic hoses are equipped with bayonet couplings with decompression. This facilitates Þt- ting the hoses even though pressure is trapped.

To dismantle, follow the instructions in the reverse order.

Storage

Store the tools safely and inaccessible to unauthor- ised people. Ensure that they are in a stable position and cannot tip over. If tools are placed high up or on a slope they must be secured so that they cannot be put into motion or fall. Protect the tools’ hydraulic couplings against dirt and damage.

English - 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DXR-310 Page Contents Introduction Symbols on the machine KEY to SymbolsOther protective equipment Safety InstructionsProtective equipment Personal protective equipmentResponsibility General safety instructionsManagement and operator If there is an accidentMachine’s risk area Work area safetyElectrical safety General working instructionsEducation and training Personal safetyOperation GeneralRotation function ManoeuvringGeneral OutriggersFalling material Towing Transport and storageMaintenance and service Machine’s safety featuresPersonal protection Mechanical protection Dust and particles TemperatureExternal environmental factors MoistureMachine’s functions PresentationWhat is what in the machine Pressure cut-off Hydraulic SystemGeneral Main pressureMachine’s hydraulic system High-voltage circuit Electric SystemLow-voltage circuit Machine’s electric system Machine’s software Remote controlBattery Control SystemWhat is what on the remote control Symbols on the remote control Stopping Starting and StoppingBefore starting StartingDesignation of the machine’s parts Key to commandsOperation Operating modesWork mode Track operation Set-up modeTransport mode Concrete cutter ToolsBucket Hydraulic hammerStorage CleaningChanging tools FittingTrack widener SettingsFitting the track widener Menu system Software version Operational settingsLCD Adjustment TuningMaintenance and Service After washing CleaningCleaning method Cleaning of componentsDaily inspection Service scheduleMiscellaneous Weekly serviceAfter the Þrst 100 hours Hours serviceChange Gear ring Service reviewLubrication Outriggers and arm systemPos MountingsShafts Tightening torqueWear and damage Level checkCracks LeakageFunctional inspection Draining hydraulic ßuid ChangeReplenishing hydraulic ßuid Air Þlter Oil ÞlterService messages and actions Action Trouble ShootingError messages Service messagesFault Cause Possible action Trouble shooting guideEnglish 50 Hz Technical DataGuide values for mains connection Hydraulic system’s pressureLubricant Preset limit valuesHydraulic ßuid and lubricant Hydraulic ßuidTechnical data Machine with tool hydraulic hammer Sound power levelNoise emissions Machine without toolEnglish Technical Data EC-declaration of conformity EC-DECLARATION of ConformityPage ´z+SXh¶6Q¨ Page 1151567-26 2009-03-16

DXR-310 specifications

The Husqvarna DXR-310 is a state-of-the-art remote-controlled demolition robot designed for various construction and demolition tasks. With an emphasis on versatility and efficiency, this robust machine stands out in the crowded landscape of demolition equipment. It is specifically engineered to tackle challenging environments while offering operators a high level of safety and control.

One of the standout features of the DXR-310 is its powerful hydraulic system, which allows for exceptional performance even in the most demanding applications. With an output of 12.5 kW, it can handle various attachments effectively, enabling it to perform a wide array of tasks, from crushing and breaking to lifting and demolition. Its compact size and lightweight design make it easy to maneuver, which is particularly beneficial in confined spaces, such as renovation projects or urban environments.

The DXR-310 is equipped with a user-friendly control system that facilitates precise operation from a distance. The ergonomic remote control is intuitive, allowing the operator to execute complex commands with ease, enhancing overall productivity. This feature is vital, especially in situations where operator safety is paramount, as it enables them to maintain a safe distance from potential hazards.

Another notable characteristic is the robot's durability and reliability. The chassis and components are designed to withstand harsh working conditions, ensuring long-term performance. The robust build minimizes downtime, enhancing overall efficiency on job sites.

The Husqvarna DXR-310 also integrates advanced technology to optimize its functionality. It is compatible with a range of attachments, including hydraulic breakers, crushers, and grapples, making it highly adaptable to various tasks. Additionally, the robot is designed with a unique suspension system that improves stability and ground contact, ensuring reliable operation on uneven surfaces.

In terms of maintenance, the DXR-310 is designed to be user-friendly, with accessible components that simplify routine checks and repairs. This commitment to easy maintenance contributes to reduced operational costs over time.

In conclusion, the Husqvarna DXR-310 demolition robot combines power, versatility, and safety into a single machine. Its advanced hydraulic system, user-friendly controls, and adaptability make it ideal for a wide range of demolition applications. The robust design and maintenance-friendly features further enhance its appeal to contractors looking for efficient solutions in the construction industry.
Top Page Image Contents